Cut level = 8
Gloss level = 6
NO SILICONE
TEXTURE :
PACKAGING:
APPLICATION METHODS:
S0 polishing compound Sea-Line is a polishing paste is designed for professionals – manufacturers, shipyards and products where it forms the outer layer of the technical gelcoat or industrial topcoat with a high hardness.
S0 polishing compound removes imperfections after sanding grit sandpaper, even P800 (depending on the hardness of the surface). The paste is designed to work with with machines with a maximum rotation speed of 2000.
Best when applied with wool and hard sponges.
Surfaces | gelcoat, polyurethane paints and varnishes, | |||
Function | removing defects from the surface gloss restoring | |||
Consistency | paste | |||
Surface preparation * | mechanical grinding | manual grinding | ||
light color | dark color | light color | light color | |
gelcoat | P800 ⇒ | P1200 ⇒ | P1200 ⇒ | P1500 ⇒ |
polyurethane paint | P1200 ⇒ | P1500 ⇒ | P1200 ⇒ | P1500 ⇒ |
hign hardness surfaces | P1200 ⇒ | P1500 ⇒ | P1500 ⇒ | P2000 ⇒ |
* grinding paper minimal gradation
Surface preparation :
Clean the surface destined for polishing. If removing defects is necessary, polish the surface with sandpaper of the following gradation preliminary polishing: <P500
Polish the surface with sandpaper of final gradation : P800 →
Dark colours or hard surfaces polish the surface with sandpaper of final gradation : P1200 →
More applicators Sea-Line® / BRAYT
(code: 300006613)
Polishing sponge whit velcro :
Polishing wool BALL (80mm) Sea-Line :
(code : 300006619)
Clean the surface, apply the compound onto an element or head (wool or tough sponge)
Apply the compound at minimum rotations on the whole surface that is being polished (800-1000 rotations/min) polishing until it changes colour and the compound changes its texture
Slowly increase the speed max. to 1800 RPM working with a little pressure
Clean the surface.
ACCESSORI PER LUCIDATURA – TESTE E MANIGLIE LUCIDANTI DISCO DI LANA : “DISCO DI LANA – doppia faccia (∅220)” “DISCO […]
Sea-Line Brayt S5 it is quick and easy in use product on base wax, recommended for every smooth and gloss […]
S1 PASTA ABRASIVA FORZA ABRASIVA = 6 LIVELLO DI LUCENTEZZA = 8 NO SILICONE Sea-Line S1 preffesional Marine polishing paste is […]
Primarily designed for the companies which produce goods or forms made of gelcoat or an industrial topcoat with a high […]
We do not recommend using universal thinners. The use of a thinner with an unknown composition may result in loss of adhesion, lack of proper flow of paint and varnish defects.
Yes, you can paint the bottom of the boat with polyurethane paint due to its high mechanical strength. We recommend this solution when the boat is not launched for a long time and is not exposed to fouling.
Il patch e compensare le irregolarità derivanti da danni durante la produzione
Barca protezione superficiale contro l’influenza di azioni distruttive di osmosi e la corrosione in ambienti difficili
Protezione contro l’acqua e contro gli effetti negativi delle radiazioni UV
Proteggere la parte inferiore della barca prima-tedesco ricoperta di alghe e conchiglie. La prevenzione dell’azione di acqua.
Rimozione efficace di ritenzione graffi, di aggiornamento e il colore del mantello gel o lacca
Laminazione, incollaggio e tappatura perdite
Per il riempimento di piccole fessure e ubyt gemme in gelcoat
Una gamma di prodotti utili quando si lavora costruttore di barche