Linguaggio:

PRODOTTI – STUCCHI

Home » Scaricare » PRODOTTI – STUCCHI
Kosmetyki do naprawy łodzi oraz jachtów
NOME DEL FILESCARICARE
TDSSDS
PRODOTTOCATALIZZATORE
(comp. A)(comp. B)
STUCCHI EPOSSIDICI
EPOXY FILLER UNIVERSALdownloadscaricarescaricare
EPOXY FILLER LIGHTWEIGHTdownloadscaricarescaricare
EPOXY FILLER FIBREGLASS (fibra di vetro)downloadscaricarescaricare
STUCCHI POLIESTERE
POLYESTER FILLER UNIVERSALdownloadscaricaredownload
POLYESTER FILLER UNIVERSAL (styrene low)downloadscaricaredownload
POLYESTER FILLER LIGHTWEIGHTdownloadscaricarescaricare
POLYESTER FILLER FIBREGLASS (fibra di vetro)downloadscaricarescaricare
POLYESTER FILLER FIBREGLASS (styrene low)downloadscaricarescaricare
POLYESTER FILLER MODELLING (per modelli)downloadscaricarescaricare
POLYESTER SPRAY FILLERdownloadscaricaredownload
THINNER FOR POLYESTER SPRAY FILLER (diluente)XscaricareX

Le nostre FAQ
Risposte alle domande più frequenti

Why the resin does not harden?

Possible causes

  • Too low temperature of ambitne,
  • Incorrect proportion of base and herdener,
  • Mixing two components from two different manufacturers

How to prevent

  • Apply the correct proportions of components
  • Maintain steady temperature (around 20ﹾC) during whole hardening process,
  • Mix the products thoroughly and bleed the mixture.

How to remove

  • The uncured mass requires complete removal from the surface.

Why does the paint have no adhesion?

Possible causes

  • Wrong surface preparation,
  • Skipping the primer in the system application process,
  • Use of universal thinners or replacements ,
  • Paint incompatibility.

How to prevent

  • Correct surface preparation (grinding, clearing, degreasing),
  • Use primers which improve adhesion of paints,
  • Use thinners which are dedicated to each paints,
  • Use of paints which are compatible to each other.

How to remove

  • Grind, clean and paint again.

Why the paint does not have the right flow?

Possible causes

  • No thinning, wrong thinner or wrong amount of thinner
  • Wrong type of roll or brush (wrong bristle lenght)
  • Applying too much or too Little paint,
  • During painting process temperature was too high or the air was too dry,
  • Incorrect preparation of too porous surface,
  • Incorrect proportion of thinner.

How to prevent

  • Use a brush/Toller suited to the type of surface or paint,
  • Use thinner which is dedicated to the type of application and paints
  • Use thinning proportions which was indicated by manufacturer,
  • Paint in right atmosphere conditions indicated by manufacturer,

How to remove

  • Grind, clean and paint again.
La nostra offerta
Familiarizzate con la nostra offerta di materiali e vernici per la costruzione di barche
Exit
Przewiń na górę