Linguaggio:

PRODOTTI – ANTIFOULING PAINTS

Home » Scaricare » PRODOTTI – ANTIFOULING PAINTS
Kosmetyki do naprawy łodzi oraz jachtów
NOME DEL FILESCARICARE
TDSSDS
HARD ANTIFOULINGdownloadscaricare
SELF-POLISHING – antifoulingdownloadscaricare
SELF-POLISHING ALU PLUS – antifoulingdownloadscaricare
SEAGUARD fouling stopdownloadscaricare
THIN FILM SILVER RACING ANTIFOULINGdownloadPart A – scaricare
Part B – scaricare
SILVER SPEED HARD ANTIFOULINGdownloadscaricare
SILVER CRUISE POLISHING ANTIFOULINGdownloadscaricare
ANTIFOULING THINNERXscaricare

Le nostre FAQ
Risposte alle domande più frequenti

Why did the polyurethane topcoat become dull?

Possible causes

  • Too short time for evaporation of the thinner,

How to prevent

  • Maintain the right conditions for complete evaporation of the thinner,

How to remove

  • Mat the surface, degrease and apply the paint according to the rule (right conditions and thinning proportions)
  • Polish surface if needed.

Why the paint does not have the right flow?

Possible causes

  • No thinning, wrong thinner or wrong amount of thinner
  • Wrong type of roll or brush (wrong bristle lenght)
  • Applying too much or too Little paint,
  • During painting process temperature was too high or the air was too dry,
  • Incorrect preparation of too porous surface,
  • Incorrect proportion of thinner.

How to prevent

  • Use a brush/Toller suited to the type of surface or paint,
  • Use thinner which is dedicated to the type of application and paints
  • Use thinning proportions which was indicated by manufacturer,
  • Paint in right atmosphere conditions indicated by manufacturer,

How to remove

  • Grind, clean and paint again.

Can I degrease surfaces with acetone?

We do not recommend degreasing the surface with acetone, because acetone evaporates very quickly, which affects the quality of cleaning the painted surface.

La nostra offerta
Familiarizzate con la nostra offerta di materiali e vernici per la costruzione di barche
Exit
Przewiń na górę