Linguaggio:

Press about us

Home » Fabbrica » Press about us
Zabezpieczenie łodzi

Our products are being described by the specialist press.

Article list:

Maj 2020

Wiatr/ POLSKA / Nr 4/5  kwiecień /maj2020

Nowe receptury szpachlówek epoksydowych

February 2019

ŻAGLE / POLAND / Nr 2/3 february/march  2019

December 2018

ŻAGLE / POLAND / Nr 12 grudzień 2018

November 2018

VAL navtika / SLOVENIA / 11/2018

ŻAGLE / POLAND / Nr 11 listopad 2018

October 2018

YACHT / GERMANY / Nr 22 / 17.10.2018

ŻAGLE / POLAND / Nr 10 październik 2018

July 2018

BOOTS – WIRTSCHAFT / GERMANY / Nr 6 / 2018

May 2018

ŻAGLE / POLAND / Nr 5 maj 2018

PLASTEK Technisches  Magazin Fur Segler / GERMANY / Nr 3-18

WasserSport / GERMANY / Mai 2018

Segler-Zeitung / GERMANY / Nr 5 Mai 2018

May 2016

YACHT (SKIPPERS) / GERMANY /Nr 5

February – March 2016

WIATR / POLAND / Nr 02/03 2016

August 2015

WIATR / POLAND/ Nr 08 2015

January – February 2015

PLASTEK Technisches  Magazin Fur Segler / GERMANY / Nr 1-15

July August September 2013

MATERIAŁY KOMPOZYTOWE / POLAND / Nr 3

May 2013

BOSMAN / ROSIJA / Nr 5

ŻAGLE / POLAND / Nr 5 Maj 2013

April 2013

WIATR / POLAND / Kwiecień 2013

February 2012

WIATR / POLAND / Luty 2012

July 2011

PLASTEK Technisches  Magazin Fur Segler / GERMANY / Nr 6-11

April 2011

ŻAGLE / POLAND / Nr 4 kwiecień 2011

July 2009

ŻAGLE / POLAND / Nr 6 czerwiec 2009

February 2009

ŻAGLE / POLAND / Nr 2 luty 2009

December 2008

FORBS / POLAND / 12/2008

December 2007

GŁOS  KOSZALIŃSKI / POLAND / 13.12.2007

August 2007

GŁOS  KOSZALIŃSKI / POLAND / 29.08.2007

July 2007

GŁOS  KOSZALIŃSKI / POLAND / 06.07.2007

July 2005

GŁOS  KOSZALIŃSKI / POLAND / 23-24.07.2005


Condividi:

Vedi anche
Altre discussioni in questa categoria

Le nostre FAQ
Risposte alle domande più frequenti

Can I paint the bottom of the boat with polyurethane paint?

Yes, you can paint the bottom of the boat with polyurethane paint due to its high mechanical strength. We recommend this solution when the boat is not launched for a long time and is not exposed to fouling.

Why the epoxy filler does not harden?

Possible causes

  • Incorrect proportion of base and herdener,
  • Too low temperature of ambient and surface (less than 10ﹾC),
  • Mixing two components from two different manufacturers,

How to prevent

  • Apply the correct proportions of components
  • Maintain steady temperature (around 20ﹾC) during the whole hardening process,
  • Use base and hardener from the same manufacturer

How to remove

  • The uncured mass requires complete removal from the surface.

Can I add more hardener to speed up the reaction?

Do not add more hardener, because after the base has cured, the remaining hardener will react with subsequent layers, which will be applied to the surface and cause defects. For the product to work properly, please follow the proportions given by the manufacturer.

La nostra offerta
Familiarizzate con la nostra offerta di materiali e vernici per la costruzione di barche
Exit
Przewiń na górę