Linguaggio:

PRODOTTI – KIT RIPARAZIONE PER GELCOAT

Home » Scaricare » PRODOTTI – KIT RIPARAZIONE PER GELCOAT
Farby antyporostowe
NOME DEL FILESCARICARE
TDSSDS
PRODOTTOCATALIZZATORE
(comp. A)(comp. B)
GELCOAT REPARAZIONE KIT (polyester)
GELCOAT FILLER “DRY FAST”downloadscaricarescaricare
GELCOAT FILLER “DRY FAST” (styren free)downloadscaricarescaricare
ALTRE
COLOR RENOVATIONdownloadscaricareX

 


Le nostre FAQ
Risposte alle domande più frequenti

Do you have to paint the scratched side of the boat?

If the scratches are not deep, then we can renew the scratched side by polishing with Sea-Line polishing pastes. Above the waterline, when the scratches are not deep, the surface can be repaired with a DRY FAST gel coat filler. Deep scratches should be filled with epoxy filler (selected depending on the requirements of the scratched surface), painted with a primer and then painted with topcoat.

Why the resin does not harden?

Possible causes

  • Too low temperature of ambitne,
  • Incorrect proportion of base and herdener,
  • Mixing two components from two different manufacturers

How to prevent

  • Apply the correct proportions of components
  • Maintain steady temperature (around 20ﹾC) during whole hardening process,
  • Mix the products thoroughly and bleed the mixture.

How to remove

  • The uncured mass requires complete removal from the surface.

Why did the polyurethane topcoat become dull?

Possible causes

  • Too short time for evaporation of the thinner,

How to prevent

  • Maintain the right conditions for complete evaporation of the thinner,

How to remove

  • Mat the surface, degrease and apply the paint according to the rule (right conditions and thinning proportions)
  • Polish surface if needed.
La nostra offerta
Familiarizzate con la nostra offerta di materiali e vernici per la costruzione di barche
Exit
Przewiń na górę