Linguaggio:

S08 INDUSTRIAL FORCE CUT

Home » Prodotti » Prodotti per lucidatura » S08 INDUSTRIAL FORCE CUT
Kosmetyki do naprawy łodzi oraz jachtów
S08 INDUSTRIAL FORCE CUT

Primarily designed for the companies which produce goods or forms made of gelcoat or an industrial topcoat with a high toughness degree.

DOES NOT CONTAINS SILICONS OR FILLERS


PRODUCT DESCRIPTION:

S08 Industrial Force Sea-Line removes grinding scratches from gelcoat surface after treatment with sandpaper of gradation P600 or higher.

Using S08 Industrial Force compound allows for shortening the labour time thanks to a high cutting force.

Specialistic polishing paste with a very high cutting force which guarantee quick removal of defects and grinding scratches from a different kind of gelcoat (especially for polishing of industrial gelcoat)

BASIC INFORMATION:

CATEGORY:

SURFACES:

POLISHING:

PACKAGING:

COLOUR:

ADVANTAGES:

Surfaceswhite gelcoat
gelcoat finished products
tool gelcoat
industrial varnishes
Categoryproduction
Functionremoving defects from the surface
Consistencypaste
Surface preparation *mechanical grindingmanual grinding
light colordark colorlight colordark color
gelcoatP600⇒P800⇒P800⇒P1200⇒
tool gelcoat (technical)P800⇒P1200⇒P2000⇒
high hardness surfacesP800⇒P1200⇒P2000⇒

*grinding paper minimal gradation

Method of use:

Surface preparation :

Clean surface destined for polishing.

P600Polish surface with sandpaper of final gradation : minimum P600 →


szlifowanie papierem P800Dark colours or hard surfaces polish with sandpaper of final gradation : minimum P800 →.


Use applicators:

More applicators Sea-Line® / BRAYT

Wool applicators Sea-Line® :

wełna-dwustronna-2Double-sided wool Sea-Line:

(code : 300006614)


wełna-jednostronnaOne side wool Sea-line :

(code: 300006613)


Sponge applicators BRAYT:

gąbka-białaPolishing sponge “PROFI” :

(code :300005933)


gabka-polerska-na-rzep-grubaPolishing sponge whit velcro :

(white – code : 300000384)


Special applicators Sea-Line® :

wełna-pol.-kula-2Polishing wool BALL (80mm) Sea-Line :

(Kod : 300006619)


Polishing :

Clean surface, apply compound onto an element or head (wool or tough sponge)


praca rotacyjna Apply compound at minimum rotations on the whole surface that is being polished (800-1000 rotations/min) polishing until it changes colour and compound changes its texture


max obrotySlowly increase speed max. to 1800 RPM working with a little pressure


Further steps :

Clean surface. If after using S08 left any defects:


In order to protect surface, it is recommended to use:

TECHNICAL INFORMATION:


Condividi:

Avete domande?
Ti risponderemo il prima possibile

Prodotti correlati

da S08 INDUSTRIAL FORCE CUT


Vedi anche
Altri prodotti in questa categoria

Le nostre FAQ
Risposte alle domande più frequenti

Can I add more hardener to speed up the reaction?

Do not add more hardener, because after the base has cured, the remaining hardener will react with subsequent layers, which will be applied to the surface and cause defects. For the product to work properly, please follow the proportions given by the manufacturer.

Is it necessary to always sand the surface between application of two different products?

We recommend to always sand the surface between applying two different products to ensure uniform surface roughness and adhesion of subsequent layers. The sanded surface should also be cleaned and degreased.

Why despite the use of antifouing paint the bottom of the boat is overgrown?

Possible causes

  • Too thin layer of antifouling paint,
  • Choosing the wrong antifouling to type of a boat or yacht
  • Thinning of antifouling paint,
  • Incorrect surface preparation before antifouling application.

How to prevent

  • Apply the right layer thickness of paint indicated by manufacturer,
  • Choose antifouling dedicated to type of boat or yacht and suitable for the type of water,
  • Do not thin antifouling because of the risk of reducing effectiveness,
  • Careful surface preparations (grinding, clearing, degreasing),

How to remove

  • Wet grinding, apply new layers of antifouling paint.
  • Use C1 shell and fouling remover.
La nostra offerta
Familiarizzate con la nostra offerta di materiali e vernici per la costruzione di barche
Exit
Przewiń na górę