Linguaggio:

WE SWITCH S3 TO NEW VERSION. WHY?

Home » Notizie » WE SWITCH S3 TO NEW VERSION. WHY?
Zabezpieczenie łodzi
WE SWITCH S3 TO NEW VERSION. WHY?

WE SWITCH S3 TO NEW VERSION. WHY?

Analyzing the most common use of S3 liquid so far we have come to the conclusion that our customers use it primarily to clean the surface after polishing, and for protection is preferable to use wax S4.
We concluded to modified S3 liquid to meet the needs of our customers and produced the next generation S3 FINISH CLEANER product.
The new S3 FINISH CLEANER:

– removes the remnants of polishing dust from the surface,

– allows check quality of the polished surface

– used as final step of the polishing process to significantly emphasize the gloss.

Does not contain silicone, teflon and fillers.
Used together with other Sea-Line polishing materials, gives excellent results on gelcoats and lacquered surfaces.

More information : S3 Finish Cleaner


Condividi:

Vedi anche
Altre discussioni in questa categoria

Le nostre FAQ
Risposte alle domande più frequenti

Why the paint does not have the right flow?

Possible causes

  • No thinning, wrong thinner or wrong amount of thinner
  • Wrong type of roll or brush (wrong bristle lenght)
  • Applying too much or too Little paint,
  • During painting process temperature was too high or the air was too dry,
  • Incorrect preparation of too porous surface,
  • Incorrect proportion of thinner.

How to prevent

  • Use a brush/Toller suited to the type of surface or paint,
  • Use thinner which is dedicated to the type of application and paints
  • Use thinning proportions which was indicated by manufacturer,
  • Paint in right atmosphere conditions indicated by manufacturer,

How to remove

  • Grind, clean and paint again.

Do you have to paint the scratched side of the boat?

If the scratches are not deep, then we can renew the scratched side by polishing with Sea-Line polishing pastes. Above the waterline, when the scratches are not deep, the surface can be repaired with a DRY FAST gel coat filler. Deep scratches should be filled with epoxy filler (selected depending on the requirements of the scratched surface), painted with a primer and then painted with topcoat.

Can I add more hardener to speed up the reaction?

Do not add more hardener, because after the base has cured, the remaining hardener will react with subsequent layers, which will be applied to the surface and cause defects. For the product to work properly, please follow the proportions given by the manufacturer.

La nostra offerta
Familiarizzate con la nostra offerta di materiali e vernici per la costruzione di barche
Exit
Przewiń na górę