Language:

Epoxy Primer 4:1 Anticorrosion

Home » Products » Primers » Epoxy Primer 4:1 Anticorrosion
Sea-Line
Epoxy Primer 4:1 Anticorrosion


TypeSteel, aluminium
PlaceAbove and below waterline
FunctionGrounding
Intercoating
Filling coat
Anticorrosive
Applicationbrush, roll, spray gun
ThinningYes – thinner for epoxy system
Theoretical coverage For 1l11-12 m2 for
85 μm WFT/ 60 μm DFT
Number of coats2 – 3
Pot life -20°C2 h
ColorOxygen red
Time between layers without sanding4 h – 5 days
Packcode
0,750l –
7,5 l –
5076
5145

Share:

Do you have any questions?
We will respond as soon as possible

Related products

from Epoxy Primer 4:1 Anticorrosion


See also
Other products in this category

Our FAQ
Answers to frequently asked questions

Why did the polyurethane topcoat become dull?

Possible causes

  • Too short time for evaporation of the thinner,

How to prevent

  • Maintain the right conditions for complete evaporation of the thinner,

How to remove

  • Mat the surface, degrease and apply the paint according to the rule (right conditions and thinning proportions)
  • Polish surface if needed.

Can I purchase products directly from you?

We do not sell retail. Our products can be found in many stores in Poland and abroad. Our distributors run stationary and online stores. The full list of distributors and contacts can be found on our website at the following link click here.

Why does the paint have no adhesion?

Possible causes

  • Wrong surface preparation,
  • Skipping the primer in the system application process,
  • Use of universal thinners or replacements ,
  • Paint incompatibility.

How to prevent

  • Correct surface preparation (grinding, clearing, degreasing),
  • Use primers which improve adhesion of paints,
  • Use thinners which are dedicated to each paints,
  • Use of paints which are compatible to each other.

How to remove

  • Grind, clean and paint again.
Our offer
Familiarize yourself with our offer of boatbuilding materials and paints
Exit
Przewiń na górę