Language:

TDS SDS – epoxy and polyester filler

Home » Download » TDS SDS – epoxy and polyester filler
Naprawa łodzi
FILE NAMEDOWNLOAD
TDSSDS
PRODUCTHARDENER
(comp. A)(comp. B)
EPOXY FILLER
EPOXY FILLER UNIVERSALdownloaddownloaddownload
EPOXY FILLER LIGHTWEIGHTdownloaddownloaddownload
EPOXY FILLER FIBREGLASSdownloaddownloaddownload
EPOXY FILLER NEW
EPOXY FILLER UNIVERSAL – NEW 2:1downloaddownloaddownload
EPOXY FILLER LIGHTWEIGHT – NEW 1:1downloaddownloaddownload
EPOXY FILLER FIBREGLASS – NEW 2:1downloaddownloaddownload
POLYESTER FILLER
POLYESTER FILLER UNIVERSALdownloaddownloaddownload
POLYESTER FILLER UNIVERSAL (low styrene)downloaddownloaddownload
POLYESTER FILLER LIGHTWEIGHTdownloaddownloaddownload
POLYESTER FILLER FIBREGLASSdownloaddownloaddownload
POLYESTER FILLER FIBREGLASS (low styrene)downloaddownloaddownload
POLYESTER FILLER MODELLINGdownloaddownloaddownload
POLYESTER SPRAY FILLERdownloaddownloaddownload
THINNER FOR POLYESTER SPRAY FILLERXdownloadX

Our FAQ
Answers to frequently asked questions

Why the epoxy filler does not harden?

Possible causes

  • Incorrect proportion of base and herdener,
  • Too low temperature of ambient and surface (less than 10ﹾC),
  • Mixing two components from two different manufacturers,

How to prevent

  • Apply the correct proportions of components
  • Maintain steady temperature (around 20ﹾC) during the whole hardening process,
  • Use base and hardener from the same manufacturer

How to remove

  • The uncured mass requires complete removal from the surface.

Why the paint does not have the right flow?

Possible causes

  • No thinning, wrong thinner or wrong amount of thinner
  • Wrong type of roll or brush (wrong bristle lenght)
  • Applying too much or too Little paint,
  • During painting process temperature was too high or the air was too dry,
  • Incorrect preparation of too porous surface,
  • Incorrect proportion of thinner.

How to prevent

  • Use a brush/Toller suited to the type of surface or paint,
  • Use thinner which is dedicated to the type of application and paints
  • Use thinning proportions which was indicated by manufacturer,
  • Paint in right atmosphere conditions indicated by manufacturer,

How to remove

  • Grind, clean and paint again.

Why are the streaks formed?

Possible causes

  • Wrong viscosity and spraying technique,
  • Failure to maintain proper evaporation time and thickness of layers,
  • Incorrect spraying pressure,
  • Too low temperature of varnish, surface or space ,
  • Wrong thinner or hardener.

How to prevent

  • Apply the right type of application method indicated by manufacturer,
  • Use working spray guns,
  • Both the object and material must have room temperature of 20ﹾC,
  • Apply correct proportion of base and hardener.

How to remove

  • Grinding and polishing,
  • Grinding and painting,
Our offer
Familiarize yourself with our offer of boatbuilding materials and paints
Exit
Przewiń na górę