Foam sanding block made of four types of material, making it very light and yet has a high internal rigidity and increased strength.
Product has two working surfaces:
Size : 140 x 75 mm | 300003608 |
Size : 200 x 75 mm | 300003609 |
Size : 290 x 75 mm | 300003610 |
PE-HD protective foil, protects from paint, dust and moisture, necessary during lacquering works.
4 x 5 m UNIWERSALNA | 300005703 |
4 x 5 m 0,007 mm | 300001981 |
Antistatic rags, dust-absorbent, to clean the dust and dirt from the surface to be painted. Product allowed to the aqua and 2K systems. Keep in closed package. Don’t use on the hot surfaces.
10 szt. – size 40 x 80 cm | 300003842 |
EPOXY PRIMER MULTIFUNCTIONAL 2K SPRAY PRODUCT DISCRIPTION: Multifunctional two components epoxy primer in spray can Simple activating system for two […]
Epoxy Lightprimer 5:1 High-quality 2-component thin coat epoxy primer. Great primer for paints and topcoats. Provides a transition layer between […]
PLASTIC CUPS (BUCKETS) WITH LID PLASTIC BOTTLE PEHD WITH CORK TOUCH UP PAINT BOTTLE METAL CAN PLASTIC CUPS (BUCKETS) WITH […]
UNIVERSAL YACHT PRIMER 1K 1-component chlorinated rubber primer Recommended above and under the water line It can be use on […]
It is not recommended to apply 2K paints over 1K paints. 1K and 2K inks differ in their composition and properties, including hardness, chemical resistance and durability. 1K paints are one-component and dry by evaporating the solvent, while 2K paints are two-component and need to be cured by adding a hardener. Applying 2K paint over 1K paint can cause unpredictable chemical reactions and lead to undesirable effects such as dulling, chipping or flaking of the paint. Therefore, always use paints according to the manufacturer’s instructions and do not mix different types of paints. farby zgodnie z instrukcjami producenta i nie mieszać różnych rodzajów farb.
Yes, you can mix Sea-Line polyurethane paints. The only difference are the pigments of polyurethane paints that determine the color of the paint. But remember to keep the right proportions of base, hardener and thinner.
Refilling and to tackle inequalities caused by damage to or during the course of production
Protects boat surfaces from the effects of destructive activities osmosis and corrosion
Provide an aesthetic and a perfect look of the boat also protective against water and UV radiation
Protect the hull from fouling with algae and shells
Effectively remove scratches, refresh the color of gelcoat or paint, fast shine effect
Special preparations for effective cleaning and refinishing
Laminating, gluing and filling in cracks in gelcoat
Range of products useful in the boat builder work