Type | GRP- laminates, wood, stel | |
Place | Above and below waterline | |
Function | Grounding Intercoating | |
Application | brush, roll, spray gun | |
Thinning | Thinner for 1 – component primer, varnisch, enamel | |
Theoretical coverage For 1l | ~7 m2 for 140 μm WFT/ 65 μm DFT | |
Number of coats | 1 – 5 | |
Dust dry 20°C | 1 h | |
Resistant against rain 20°C | 4 h | |
Waterproof 20°C | 16 h | |
Time to launch 20°C | min. 24 h | |
Elapsed time before applying next coat 20°C | min. 5 h | |
Color (matt) | grey | |
Pack | 0,750 l | 2,5 l |
code | 8172 | 8174 |
It is very important to use paint thinners, which provide the appropriate parameters of paint – flow, pot life, time […]
MASKING TAPE MASKING TAPE – MASTER “AQUA” SILVER TAPE – UNIVERSAL MASKING TAPE High-quality masking tape characterized by very good adhesion […]
DUST MASK DISPOSABLE NITRILE GLOVES “MASTER” DISPOSABLE NITRILE GLOVES WORKWEAR – SINGLE USE POLYESTER WORKWEAR (blue) reusable overall PASTE HAND […]
Thinner for all Sea-Line epoxy primers. It is very important to use paint thinners, which provide the appropriate parameters of […]
CORK SANDING BLOCK FOAM SANDING BLOCK PLASTIC SANDING BLOCK PROTECTIVE FOIL PAPER TOWEL (ROLL) ANTISTATIC RAGS CORK SANDING BLOCK Sanding […]
2-component epoxy anti-corrosive primer. Recommended for priming steel and aluminum. Excellent substrate protection against corrosion. Provides very good adhesion. Good […]
EPOXY PRIMER MULTIFUNCTIONAL 2K SPRAY PRODUCT DISCRIPTION: Multifunctional two components epoxy primer in spray can Simple activating system for two […]
Yes, you can paint the bottom of the boat with polyurethane paint due to its high mechanical strength. We recommend this solution when the boat is not launched for a long time and is not exposed to fouling.
We recommend to always sand the surface between applying two different products to ensure uniform surface roughness and adhesion of subsequent layers. The sanded surface should also be cleaned and degreased.
Refilling and to tackle inequalities caused by damage to or during the course of production
Protects boat surfaces from the effects of destructive activities osmosis and corrosion
Provide an aesthetic and a perfect look of the boat also protective against water and UV radiation
Protect the hull from fouling with algae and shells
Effectively remove scratches, refresh the color of gelcoat or paint, fast shine effect
Special preparations for effective cleaning and refinishing
Laminating, gluing and filling in cracks in gelcoat
Range of products useful in the boat builder work