Cut level = 10
Gloss level = 6
NO SILICONE
S07 Heavy Cut Sea-Line is specialistic polishing paste with a very high cutting force which guarantee quick removal of defects and grinding scratches from a different kind of gelcoat (especially for polishing of industrial gelcoat)
S07 Heavy Cut Sea-Line is primarily designed for the companies which produce goods in which the outer layer is gelcoat or forms made from utility gelcoat and an industrial topcoat with a high toughness degree.
S07 Heavy Cut Sea-Line removes grinding scratches from gelcoat surface after treatment with sandpaper of gradation P800 or higher. The best results on industrial gelcoat we obtain when we finish grinding with sandpaper P1200 or higher.
Using S07 compound allows for shortening the labour time thanks to a high cutting force and gloss in final stage of work.
TEXTURE :
PACKAGING:
APPLICATION METHODS:
Surfaces | tool gelcoat (technical), gelcoat, | |||
Function | removing defects from the surface gloss restoring | |||
Consistency | paste | |||
Surface preparation * | mechanical grinding | manual grinding | ||
light color | dark color | light color | dark color | |
gelcoat | P800⇒ | P1200⇒ | P800⇒ | P1200⇒ |
tool gelcoat (technical) | P1200⇒ | P1500⇒ | P2000⇒ | |
high hardness surfaces | P1200⇒ | P1500⇒ | P2000⇒ |
Surface preparation :
Clean surface destined for polishing.
Polish surface with sandpaper of final gradation : P800 →
Dark colours or hard surfaces polish with sandpaper of final gradation : P1200 →.
More applicators Sea-Line® / BRAYT
(code: 300006613)
Polishing sponge whit velcro :
(white – code : 300000384)
Clean surface, apply compound onto an element or head (wool or tough sponge)
Apply compound at minimum rotations on the whole surface that is being polished (800-1000 rotations/min) polishing until it changes colour and compound changes its texture
Slowly increase speed max. to 1800 RPM working with a little pressure
Further steps :
Clean surface. If after using S07 left any defects:
S4 CERA CON PROTEZIONE UV S4 PROTECT WAX Dona un’ottima lucentezza e una protezione duratura. Riduce l’adesione dello sporco creando […]
PASTA ABRASIVA FORTE FORZA ABRASIVA = 9 LIVELLO DI LUCENTEZZA = 8 NO SILICONE DESCRIZIONE DEL PRODOTTO : Questa pasta ha una elevata […]
Se il gelcoat, lo smalto o la vernice hanno perso il suo splendore o hanno piccoli graffi causati dal normale […]
S1 PASTA ABRASIVA FORZA ABRASIVA = 6 LIVELLO DI LUCENTEZZA = 8 NO SILICONE Sea-Line S1 preffesional Marine polishing paste is […]
Sea-Line yacht paints are designed for painting the surface of boats and yachts made of various materials, e.g. laminate, wood or steel. We do not have a certificate of the National Institute of Hygiene, which would allow the use of yacht paint to paint the tank with drinking water.
Sea-Line HARD and Sea-Line self-polishing antifouling are not intended for aluminum surfaces. They include copper oxide, which in contact with aluminum causes galvanic corrosion. Especially on aluminum, we offer ALU-PLUS self-polishing anti-fouling paint, which, in addition to excellent adhesion to aluminum, is also 30% more effective than traditional anti-fouling paints.
Yes, you can mix Sea-Line polyurethane paints. The only difference are the pigments of polyurethane paints that determine the color of the paint. But remember to keep the right proportions of base, hardener and thinner.
Il patch e compensare le irregolarità derivanti da danni durante la produzione
Barca protezione superficiale contro l’influenza di azioni distruttive di osmosi e la corrosione in ambienti difficili
Protezione contro l’acqua e contro gli effetti negativi delle radiazioni UV
Proteggere la parte inferiore della barca prima-tedesco ricoperta di alghe e conchiglie. La prevenzione dell’azione di acqua.
Rimozione efficace di ritenzione graffi, di aggiornamento e il colore del mantello gel o lacca
Laminazione, incollaggio e tappatura perdite
Per il riempimento di piccole fessure e ubyt gemme in gelcoat
Una gamma di prodotti utili quando si lavora costruttore di barche