Langue:

S07 HEAVY CUT – pâte à polir

Accueil » Produits » Système de polissage » S07 HEAVY CUT – pâte à polir
Kosmetyki do naprawy łodzi oraz jachtów
S07 HEAVY CUT – pâte à polir

So7 POLISHING COMPOUND – HEAVY CUT

NO SILICONE


PRODUCT DESCRIPTION :

S07 Heavy Cut Sea-Line is specialistic polishing paste with a very high cutting force which guarantee quick removal of defects and grinding scratches from a different kind of gelcoat  (especially for polishing of industrial gelcoat)

S07 Heavy Cut Sea-Line is primarily designed for the companies which produce goods in which the outer layer is gelcoat or forms made from utility gelcoat and an industrial topcoat with a high toughness degree.

S07 Heavy Cut Sea-Line removes grinding scratches from gelcoat surface  after treatment with sandpaper of gradation P800 or higher. The best results on industrial gelcoat we obtain when we finish grinding with sandpaper P1200 or higher.

Using S07 compound allows for shortening the labour time thanks to a high cutting force and gloss in final stage of work.

TEXTURE :

PACKAGING:

APPLICATION METHODS:

Surfacestool gelcoat (technical), gelcoat,
Function

removing defects from the surface

gloss restoring

Consistencypaste
Surface preparation *mechanical grindingmanual grinding
light colordark colorlight colordark color
gelcoatP800⇒P1200⇒P800⇒P1200⇒
tool gelcoat (technical)P1200⇒P1500⇒P2000⇒
high hardness surfacesP1200⇒P1500⇒P2000⇒

Method of use:

Surface preparation :

Clean surface destined for polishing.

szlifowanie papierem P800Polish surface with  sandpaper of final gradation : P800 →


szlifowanie papierem P1200Dark colours or hard surfaces polish with  sandpaper of final gradation : P1200 →.


Use applicators:

More applicators Sea-Line® / BRAYT

Wool applicators Sea-Line® :

wełna-dwustronna-2Double-sided wool Sea-Line:

(code : 300006614)


wełna-jednostronnaOne side wool Sea-line :

(code:   300006613)


Sponge applicators  BRAYT:

gąbka-białaPolishing sponge « PROFI » :

(code :300005933)


gabka-polerska-na-rzep-grubaPolishing sponge whit velcro :

(white – code : 300000384)


Special applicators Sea-Line® :

wełna-pol.-kula-2Polishing wool BALL (80mm) Sea-Line :

(Kod : 300006619)


Polishing :

Clean surface, apply compound onto an element or head (wool or tough sponge)


praca rotacyjna Apply compound at minimum rotations on the whole surface that is being polished (800-1000 rotations/min) polishing until it changes colour and  compound changes its texture


max obrotySlowly increase speed max. to 1800 RPM working with a little pressure


Further steps :

Clean surface. If after using S07 left any defects:


In order to protect surface, it is recommended to use:

Technical information:


Partager:

Avez-vous des questions?
Nous vous répondrons dans les plus brefs délais
 
Voir aussi
Autres produits de cette catégorie

Notre FAQ
Réponses aux questions fréquemment posées

Can I add some thinner to antifouling paint?

There is a possibility of thinning antifouling, but we do not recommend this procedure due to the risk of reducing the effectiveness of the paint. If it is necessary to thin the antifouling paint, it is recommended to dilute it to a maximum of 0-5% (by volume).

Why the paint does not have the right flow?

Possible causes

  • No thinning, wrong thinner or wrong amount of thinner
  • Wrong type of roll or brush (wrong bristle lenght)
  • Applying too much or too Little paint,
  • During painting process temperature was too high or the air was too dry,
  • Incorrect preparation of too porous surface,
  • Incorrect proportion of thinner.

How to prevent

  • Use a brush/Toller suited to the type of surface or paint,
  • Use thinner which is dedicated to the type of application and paints
  • Use thinning proportions which was indicated by manufacturer,
  • Paint in right atmosphere conditions indicated by manufacturer,

How to remove

  • Grind, clean and paint again.

Why are the streaks formed?

Possible causes

  • Wrong viscosity and spraying technique,
  • Failure to maintain proper evaporation time and thickness of layers,
  • Incorrect spraying pressure,
  • Too low temperature of varnish, surface or space ,
  • Wrong thinner or hardener.

How to prevent

  • Apply the right type of application method indicated by manufacturer,
  • Use working spray guns,
  • Both the object and material must have room temperature of 20ﹾC,
  • Apply correct proportion of base and hardener.

How to remove

  • Grinding and polishing,
  • Grinding and painting,
Notre offre
Familiarisez-vous avec notre offre de matériaux et de peintures pour la construction de bateaux
Exit
Przewiń na górę