Is elastic sealant recommended for sealing and bonding various types of materials.
POLYMER is recomended for use on :
MS POLYMER
Type | laminat, steel, wood, concret, plexi, etc. |
Place | Above and below waterline |
Function | sealing bonding |
Chemical character | hybrid |
Densinity | 1,44 g/cm³ |
Curing mechanizm | apsorption of moisture from air |
Elogation at break | to 500% (DIN 53 504) |
Tensile strenght | 3,0 N/mm² (DIN 53 504) |
Tear resistance | 20 N/mm |
Resistant to temperatures | -40ºC to + 90ºC |
Resistant to temperatures for short intervals | to +120ºC (white, black) |
to +100ºC (transparent) | |
Time for skin formation 20ºC | 15 minut |
Curing time 20ºC | 24 h (weld to 3 mm) |
Time to contact with water 20ºC | min. 30 minutes |
Time to be painted 20ºC | 3 day |
Shrink | no |
WHITE 200 ml / code : 8208
BLACK 200 ml / code : 8210
TRANSPARENT 200 ml / code : 8211
Apply on surfaces no need to priming.
Steel surfaces is recommend to prime using Epoxy Anticorrosion primer 4:1 Sea-Line.
Wood and concrete is recommend to prime using Epoxy Woodprimer 10:4 Sea-Line.
In case of application on natural wood, its humidity should be lower than 20%.
Clean surfaces from rust, damage paint coatings, etc. To increase adhesion, is recommend to sand surfaces by sand paper :
Clean surfaces from dust and contamination.
Grease and salt remove using Cleaner Sea-Line®
Thanks to advance dispensing system, POLYMER does not require extra tools to application, provides exact thickness of weld during application.
unlock nozzle
unlock dosing regulator
set dosing regulator accordance with the needs
apply product by pressing lever
after finishing application, secure dosing nozzle and block dosing regulator
DESCRIZIONE DEL PRODOTTO: Raccomndato per sgrassare le superfici prima delle applicazioni. CONFEZIONE / CODICE: 1 l / CODICE : 3990 INFORMAZIONI […]
MASCHERINA GUANTI MONOUSO IN NITRILE “MASTER” GUANTI MONOUSO IN NITRILE WORKWEAR – SINGLE USE POLYESTER WORKWEAR (blue) reusable overall PASTE […]
TAMPONI PER CARTEGGIATURA – sughero naturale TAMPONI PER CARTEGGIATURA – schluma di sughero TELO PROTETTIVO ROTOLO ASCIUGATUTTO PANNI ANTISTATICI TAMPONI […]
DILUENTE PER SMALTI POLIURETANICI COLORATI E TRASPARENTI PER APPLICAZIONE A PENNELLO O RULLO DESCRIZIONE DEL PRODOTTO: che conferiscono al prodotto […]
DESCRIZIONE DEL PRODOTTO: Il rigenerante del colore è un prodotto che non contiene silicone e ridà brillantezza ai colori. Può […]
DESCRIZIONE DEL PRODOTTO: Stucco bicomponente spary. Raccomandato come primer su chiglie rinforzate in vetroresina ed altre superfici in vetroresina. Per […]
FIBRA DI VETRO MATE Questa fibra, assieme alle resine da laminazione, è utilizzata per le riparazioni di grossi fori, nelle […]
There is a possibility of thinning antifouling, but we do not recommend this procedure due to the risk of reducing the effectiveness of the paint. If it is necessary to thin the antifouling paint, it is recommended to dilute it to a maximum of 0-5% (by volume).
If the scratches are not deep, then we can renew the scratched side by polishing with Sea-Line polishing pastes. Above the waterline, when the scratches are not deep, the surface can be repaired with a DRY FAST gel coat filler. Deep scratches should be filled with epoxy filler (selected depending on the requirements of the scratched surface), painted with a primer and then painted with topcoat.
Il patch e compensare le irregolarità derivanti da danni durante la produzione
Barca protezione superficiale contro l’influenza di azioni distruttive di osmosi e la corrosione in ambienti difficili
Protezione contro l’acqua e contro gli effetti negativi delle radiazioni UV
Proteggere la parte inferiore della barca prima-tedesco ricoperta di alghe e conchiglie. La prevenzione dell’azione di acqua.
Rimozione efficace di ritenzione graffi, di aggiornamento e il colore del mantello gel o lacca
Laminazione, incollaggio e tappatura perdite
Per il riempimento di piccole fessure e ubyt gemme in gelcoat
Una gamma di prodotti utili quando si lavora costruttore di barche