Linguaggio:

PROTEGGERE LA SALUTE E LA SICUREZZA

Home » Prodotti » Accessori » PROTEGGERE LA SALUTE E LA SICUREZZA
Producent farb jachtowych

MASCHERINA

DESCRIZIONE DEL PRODOTTO:

Protegge le vie respiratorie dalla polvere. Non utilizzare in stanze piccole scarsamente ventilate. Non protegge da gas, vapori ed aereosol.

Ochrona BHP maseczka przeciwpylowa
CONFEZIONE / CODICE:

GUANTI MONOUSO IN NITRILE “MASTER”

DESCRIZIONE DEL PRODOTTO:

Durevole e resistente al momentaneo effetto dei solventi.
Non contengono siliconi.
Disponibili in confezione da 100 pezzi.

Ochrona BHP rękawiczki nitrylowe MASTER

CONFEZIONE / CODICE:

PROTEZIONE OHS – GUANTI MONOUSO IN NITRILE

DESCRIZIONE DEL PRODOTTO:

Durevole e resistente al momentaneo effetto dei solventi.
Non contengono siliconi.
Disponibile in confezioni a portata di mano di 3 coppie o in un cartone di 100 pezzi.

Ochrona BHP rekawice nitrylowe TROTON STANDARD
CONFEZIONE / CODICE:

WORKWEAR – SINGLE USE

CONFEZIONE / CODICE:

Fleece jumpsuit with hood. Protects against dust and liquid chemical products such as paints, primers.

Ochrona BHP kombinezon bialy jednorazowy
VOLUME / CODICE:

COLORE:

POLYESTER WORKWEAR (blue) reusable overall

DESCRIZIONE DEL PRODOTTO:

To be used for protect outerwear from  dirt or damage during paint work.  Doesn’t protect skin from the harmful effects of hazardous substances

Ochrona BHP kombinezon granatowy wielokrotnego użytku

CONFEZIONE / CODICE:

COLORE:

PASTE HAND WASHING

DESCRIZIONE DEL PRODOTTO:

Paste with an abrasive agent. Made with natural solvents from citrus fruits, as well as specially selected components for hand washing: printer’s ink, soot, car lacquer, cement, grease, graphite oils, etc. The swashed skin is soft and elastic. Does not irritate skin. Ecological product. Does not contain sand. PH 6.0-7.0

Ochrona BHP pasta do mycia rąk 500g

CONFEZIONE / CODICE:


Condividi:

Avete domande?
Ti risponderemo il prima possibile
 
Vedi anche
Altri prodotti in questa categoria

Le nostre FAQ
Risposte alle domande più frequenti

Why the epoxy filler does not harden?

Possible causes

  • Incorrect proportion of base and herdener,
  • Too low temperature of ambient and surface (less than 10ﹾC),
  • Mixing two components from two different manufacturers,

How to prevent

  • Apply the correct proportions of components
  • Maintain steady temperature (around 20ﹾC) during the whole hardening process,
  • Use base and hardener from the same manufacturer

How to remove

  • The uncured mass requires complete removal from the surface.

Why does the paint have no adhesion?

Possible causes

  • Wrong surface preparation,
  • Skipping the primer in the system application process,
  • Use of universal thinners or replacements ,
  • Paint incompatibility.

How to prevent

  • Correct surface preparation (grinding, clearing, degreasing),
  • Use primers which improve adhesion of paints,
  • Use thinners which are dedicated to each paints,
  • Use of paints which are compatible to each other.

How to remove

  • Grind, clean and paint again.

Can I add more hardener to speed up the reaction?

Do not add more hardener, because after the base has cured, the remaining hardener will react with subsequent layers, which will be applied to the surface and cause defects. For the product to work properly, please follow the proportions given by the manufacturer.

La nostra offerta
Familiarizzate con la nostra offerta di materiali e vernici per la costruzione di barche
Exit
Przewiń na górę