Linguaggio:

Wełna polerska w wersji premium – nowość 2023

Home » Notizie » Wełna polerska w wersji premium – nowość 2023
Naprawa łodzi

New in the 2023 season is a new polishing wool

The new black and white polishing pads in premium quality are intended primarily for polishing light and dark gel coats on laminate products, tool gel coats and PU varnishes. They are perfect for removing matting and scratches on large surfaces. Most importantly, the new polishing heads optimize efficiency and reduce working time. Premium furs are designed to provide the best possible cutting speeds and forces. This is possible due to the fact that the fur is made of a high-quality mixture of 100% natural wool with equal length and twist of fibers. It has a significantly extended useful life compared to other furs. The Long Life polishing pad is available in a single-sided version with a diameter of 190 mm and a double-sided version with a diameter of 230 mm.

Polishing products on offer:

An overview of polishing products for yachts and boats offered by the Sea-Line brand can be found here.

Other polishing products for use in the furniture and automotive industries can be found here.


Condividi:

Vedi anche
Altre discussioni in questa categoria

Le nostre FAQ
Risposte alle domande più frequenti

Can I add some thinner to antifouling paint?

There is a possibility of thinning antifouling, but we do not recommend this procedure due to the risk of reducing the effectiveness of the paint. If it is necessary to thin the antifouling paint, it is recommended to dilute it to a maximum of 0-5% (by volume).

Why the paint does not have the right flow?

Possible causes

  • No thinning, wrong thinner or wrong amount of thinner
  • Wrong type of roll or brush (wrong bristle lenght)
  • Applying too much or too Little paint,
  • During painting process temperature was too high or the air was too dry,
  • Incorrect preparation of too porous surface,
  • Incorrect proportion of thinner.

How to prevent

  • Use a brush/Toller suited to the type of surface or paint,
  • Use thinner which is dedicated to the type of application and paints
  • Use thinning proportions which was indicated by manufacturer,
  • Paint in right atmosphere conditions indicated by manufacturer,

How to remove

  • Grind, clean and paint again.

Why the resin does not harden?

Possible causes

  • Too low temperature of ambitne,
  • Incorrect proportion of base and herdener,
  • Mixing two components from two different manufacturers

How to prevent

  • Apply the correct proportions of components
  • Maintain steady temperature (around 20ﹾC) during whole hardening process,
  • Mix the products thoroughly and bleed the mixture.

How to remove

  • The uncured mass requires complete removal from the surface.
La nostra offerta
Familiarizzate con la nostra offerta di materiali e vernici per la costruzione di barche
Exit
Przewiń na górę