Linguaggio:

PRODOTTI PER LUCIDATURA

Home » Scaricare » PRODOTTI PER LUCIDATURA
Zabezpieczenie łodzi
NOME DEL FILESCARICARE
S0 – FAST CUT & MEDIUM GLOSSdownloadscaricare
S05 – ONE STEP, HEAVY CUT & GLOSS (for gelcoat)downloadscaricare
S07 – HEAVY CUT (for gelcoat)downloadscaricare
S08 – INDUSTRIAL FORCE CUTdownloadscaricare
S1 – SOFT CUT & GLOSS (Liquid)downloadscaricare
S1 PREMIUM – ONE STEP, CUT & HIGH GLOSSdownloadscaricare
S2 – EXTRA SHINE HOLOGRAM REMOVER (pasta abrasiva per finitura)downloadscaricare
S3 – FINISH CLEANER (shine control)downloadscaricare
S4 – PROTECT WAXdownloadscaricare
S5 – QUICK WAXdownloadscaricare

Le nostre FAQ
Risposte alle domande più frequenti

Why the epoxy filler does not harden?

Possible causes

  • Incorrect proportion of base and herdener,
  • Too low temperature of ambient and surface (less than 10ﹾC),
  • Mixing two components from two different manufacturers,

How to prevent

  • Apply the correct proportions of components
  • Maintain steady temperature (around 20ﹾC) during the whole hardening process,
  • Use base and hardener from the same manufacturer

How to remove

  • The uncured mass requires complete removal from the surface.

Can I purchase products directly from you?

We do not sell retail. Our products can be found in many stores in Poland and abroad. Our distributors run stationary and online stores. The full list of distributors and contacts can be found on our website at the following link click here.

Can I add some thinner to antifouling paint?

There is a possibility of thinning antifouling, but we do not recommend this procedure due to the risk of reducing the effectiveness of the paint. If it is necessary to thin the antifouling paint, it is recommended to dilute it to a maximum of 0-5% (by volume).

La nostra offerta
Familiarizzate con la nostra offerta di materiali e vernici per la costruzione di barche
Exit
Przewiń na górę