Γλώσσα:

Products – polishing system

Ιστοσελίδα » Λήψεις » Products – polishing system
Sea Line farby jachtowe
FILE NAMEDOWNLOAD
TDSSDS
S0 – FAST CUT & MEDIUM GLOSSdownloadλήψεις
S05 – ONE STEP, HEAVY CUT & GLOSS (for gelcoat)downloadλήψεις
S07 – HEAVY CUT (for gelcoat)downloadλήψεις
S08 – INDUSTRIAL FORCE CUTdownloadλήψεις
S1 – SOFT CUT & GLOSS (Liquid)downloadλήψεις
S1 PREMIUM – ONE STEP, CUT & HIGH GLOSSdownloadλήψεις
S2 – EXTRA SHINE HOLOGRAM REMOVER (finishing compound)downloadλήψεις
S3 – FINISH CLEANER (shine control)downloadλήψεις
S4 – PROTECT WAXdownloadλήψεις
S5 – QUICK WAXdownloadλήψεις

Οι συχνές ερωτήσεις μας
Απαντήσεις σε συνήθεις ερωτήσεις

Why the epoxy filler does not harden?

Possible causes

  • Incorrect proportion of base and herdener,
  • Too low temperature of ambient and surface (less than 10ﹾC),
  • Mixing two components from two different manufacturers,

How to prevent

  • Apply the correct proportions of components
  • Maintain steady temperature (around 20ﹾC) during the whole hardening process,
  • Use base and hardener from the same manufacturer

How to remove

  • The uncured mass requires complete removal from the surface.

Can I use universal thinner?

We do not recommend using universal thinners. The use of a thinner with an unknown composition may result in loss of adhesion, lack of proper flow of paint and varnish defects.

Do you have to paint the scratched side of the boat?

If the scratches are not deep, then we can renew the scratched side by polishing with Sea-Line polishing pastes. Above the waterline, when the scratches are not deep, the surface can be repaired with a DRY FAST gel coat filler. Deep scratches should be filled with epoxy filler (selected depending on the requirements of the scratched surface), painted with a primer and then painted with topcoat.

Η προσφορά μας
Εξοικειωθείτε με την προσφορά μας σε υλικά και χρώματα ναυπήγησης σκαφών
Exit
Przewiń na górę