Use biocides safely. Always read the label and product information before use.
| Type | GRP laminates, wood, steel | |||||
| Place | Below waterline | |||||
| Function | Antifouling paint discourages the growth of barnacles, weed, and other water life on the submersed hull of the boat. | |||||
| Application | brush, roll airless spray gun (only professional) | |||||
| Thinning * | No recommended | |||||
| Theoretical coverage For 1l | by roller | by spray | ||||
| 9 ~ 10 m² | 3 ~ 5 m² | |||||
| Coat thickness (WTF) | 98 μm | 196 μm | ||||
| Finish thickness (DTF) | 50 μm | 100 μm | ||||
| Coats number | 2 | 1 | ||||
| Recommended dry layer | 100 μm | |||||
| Hardening the surfaces | 23ºC | 15ºC | ||||
| Touch dry | 30 minutes | 45 minutes | ||||
| Immersion: | 4 hours | 6 hours | ||||
| Dry to recoat (overcoating) | min. 6 hours | min. 10 hours | ||||
| Dry to launch (immersion times) | max 6 months | max 6 months | ||||
| Pack | 0,75 l | 2,5 l | ||||
| Color ** | code | code | ||||
| white red blue navy black | 300008388 300008390 300008392 300008394 300008396 | 300008387 300008389 300008391 300008393 300008395 | ||||
In the case of high temperatures and the need to thin the antifouling paint, a maximum dilution of 0-5% (by volume) is recommended.
Dilution and the application method directly affect the thickness of the antifouling paint layer.
Special attention should be paid to obtaining a specific coating thickness (100 μm DTF), which ensures the effective operation of the antifouling paint.
Exposure of a freshly applied antifouling paint to moist air can lead to color change. The discoloration is only superficial and does not affect the effectiveness of the antifouling paint. Due to the content of copper oxide, a small color difference between the parts of the antifouling paint is acceptable.
Self – polishing Antifouling ALU PLUS protect areas below the water line. It can be applied on aluminium (light alloy), […]
Suitable for salty and regular water. Suitable for sailing and motor boats traveling with a maximum speed 40 knots. For […]
It is very important to use paint thinners, which provide the appropriate parameters of paint – flow, pot life, time […]
Fouling Stop SEAGUARD – a new anti-fouling paint for hulls. SEAGUARD does not contain active ingredients, i.e. toxic biocides. The bottom […]
We do not recommend using universal thinners. The use of a thinner with an unknown composition may result in loss of adhesion, lack of proper flow of paint and varnish defects.
Il patch e compensare le irregolarità derivanti da danni durante la produzione
Barca protezione superficiale contro l’influenza di azioni distruttive di osmosi e la corrosione in ambienti difficili
Protezione contro l’acqua e contro gli effetti negativi delle radiazioni UV
Proteggere la parte inferiore della barca prima-tedesco ricoperta di alghe e conchiglie. La prevenzione dell’azione di acqua.
Rimozione efficace di ritenzione graffi, di aggiornamento e il colore del mantello gel o lacca
Laminazione, incollaggio e tappatura perdite
Per il riempimento di piccole fessure e ubyt gemme in gelcoat
Una gamma di prodotti utili quando si lavora costruttore di barche
