Use biocides safely. Always read the label and product information before use.
Type | GRP laminates, wood, steel | |||||
Place | Below waterline | |||||
Function | Antifouling paint discourages the growth of barnacles, weed, and other water life on the submersed hull of the boat. | |||||
Application | brush, roll only professional : airless spray gun or conventional spray | |||||
Thinning * | No recommended | |||||
Theoretical coverage For 1l | by roller | by spray | ||||
11 ~ 12 m² | 4 ~ 6 m² | |||||
Coat thickness (WTF) | 80 μm | 160 μm | ||||
Finish thickness (DTF) | 30 μm | 60 μm | ||||
Coats number | 2 | 1 | ||||
Recommended dry layer | 60 μm | |||||
Hardening the surfaces | 23ºC | 15ºC | ||||
Touch dry | 20 minutes | 30 minutes | ||||
Immersion: | 2 hours | 3 hours | ||||
Dry to recoat (overcoating) | min. 6 hours | min. 10 hours | ||||
Dry to launch (immersion times) | max 6 months | max 6 months | ||||
Pack | 0,75 l | 2,0 l | ||||
Color | code | code | ||||
Graphite | 300008380 | 300008379 |
In the case of high temperatures and the need to thin the antifouling paint, a maximum dilution of 0-5% (by volume) is recommended.
Dilution and the application method directly affect the thickness of the antifouling paint layer.
Special attention should be paid to obtaining a specific coating thickness (100 μm DTF), which ensures the effective operation of the antifouling paint.
Silver Speed HARD Antifouling is a hard antifouling paint, effectively preventing fouling organism: aquatic plants and animals or slime. Ideal […]
It is very important to use paint thinners, which provide the appropriate parameters of paint – flow, pot life, time […]
Self – polishing Antifouling ALU PLUS protect areas below the water line. It can be applied on aluminium (light alloy), […]
Fouling Stop SEAGUARD – a new anti-fouling paint for hulls. SEAGUARD does not contain active ingredients, i.e. toxic biocides. The bottom […]
Do not add more hardener, because after the base has cured, the remaining hardener will react with subsequent layers, which will be applied to the surface and cause defects. For the product to work properly, please follow the proportions given by the manufacturer.
Il patch e compensare le irregolarità derivanti da danni durante la produzione
Barca protezione superficiale contro l’influenza di azioni distruttive di osmosi e la corrosione in ambienti difficili
Protezione contro l’acqua e contro gli effetti negativi delle radiazioni UV
Proteggere la parte inferiore della barca prima-tedesco ricoperta di alghe e conchiglie. La prevenzione dell’azione di acqua.
Rimozione efficace di ritenzione graffi, di aggiornamento e il colore del mantello gel o lacca
Laminazione, incollaggio e tappatura perdite
Per il riempimento di piccole fessure e ubyt gemme in gelcoat
Una gamma di prodotti utili quando si lavora costruttore di barche