Use biocides safely. Always read the label and product information before use.
Type | GRP laminates, wood, aluminium, steel | |||||
Place | Below waterline | |||||
Function | Antifouling paint discourages the growth of barnacles, weed, and other water life on the submersed hull of the boat. | |||||
Application | brush, roll, airless spray gun (only professional) | |||||
Thinning * | No recommended | |||||
Theoretical coverage For 1l | by roller | by spray | ||||
9 ~ 10 m² | 3 ~ 5 m² | |||||
Coat thickness (WTF) | 98 μm | 196 μm | ||||
Finish thickness (DTF) | 50 μm | 100 μm | ||||
Coats number | 2 | 1 | ||||
Recommended dry layer | 100 μm | |||||
Hardening the surfaces | 23ºC | 15ºC | ||||
Touch dry | 30 minutes | 45 minutes | ||||
Immersion: | 8 hours | 12 hours | ||||
Dry to recoat (overcoating) | min. 6 hours | min. 10 hours | ||||
Dry to launch (immersion times) | max 6 months | max 6 months | ||||
Pack | 0,75 l | 2,5 l | ||||
Color ** | code | code | ||||
red navy black | 300008382 300008384 300008386 | 300008381 300008383 300008385 |
In the case of high temperatures and the need to thin the antifouling paint, a maximum dilution of 0-5% (by volume) is recommended.
Dilution and the application method directly affect the thickness of the antifouling paint layer.
Special attention should be paid to obtaining a specific coating thickness (100 μm DTF), which ensures the effective operation of the antifouling paint.
Exposure of a freshly applied antifouling paint to moist air can lead to color change.
The discoloration is only superficial and does not affect the effectiveness of the antifouling paint.
HARD ANTIFOULING paint: Suitable for salty and regular water. Suitable for sailing and motor boats traveling with a maximum speed […]
THIN FILM Silver Racing is a hard antifouling paint, effectively preventing fouling organism: aquatic plants and animals or slime. Ideal […]
PENNELLO PROFESSIONALE Sea-Line® PENNELLO Sea-Line® RULLI Sea-Line® IMPUGNATURA PER RULLI Sea-Line® VASCHETTA PLASTICA Sea-Line® STECCA PER MISCELARE Sea-Line® TAZZE GRADUATE […]
Fouling Stop SEAGUARD – a new anti-fouling paint for hulls. SEAGUARD does not contain active ingredients, i.e. toxic biocides. The bottom […]
Yes, you can paint the bottom of the boat with polyurethane paint due to its high mechanical strength. We recommend this solution when the boat is not launched for a long time and is not exposed to fouling.
Sea-Line HARD and Sea-Line self-polishing antifouling are not intended for aluminum surfaces. They include copper oxide, which in contact with aluminum causes galvanic corrosion. Especially on aluminum, we offer ALU-PLUS self-polishing anti-fouling paint, which, in addition to excellent adhesion to aluminum, is also 30% more effective than traditional anti-fouling paints.
Il patch e compensare le irregolarità derivanti da danni durante la produzione
Barca protezione superficiale contro l’influenza di azioni distruttive di osmosi e la corrosione in ambienti difficili
Protezione contro l’acqua e contro gli effetti negativi delle radiazioni UV
Proteggere la parte inferiore della barca prima-tedesco ricoperta di alghe e conchiglie. La prevenzione dell’azione di acqua.
Rimozione efficace di ritenzione graffi, di aggiornamento e il colore del mantello gel o lacca
Laminazione, incollaggio e tappatura perdite
Per il riempimento di piccole fessure e ubyt gemme in gelcoat
Una gamma di prodotti utili quando si lavora costruttore di barche