Linguaggio:

PROTEGGERE LA SALUTE E LA SICUREZZA

Home » Prodotti » Accessori » PROTEGGERE LA SALUTE E LA SICUREZZA
Farby antyporostowe

MASCHERINA

DESCRIZIONE DEL PRODOTTO:

Protegge le vie respiratorie dalla polvere. Non utilizzare in stanze piccole scarsamente ventilate. Non protegge da gas, vapori ed aereosol.

Ochrona BHP maseczka przeciwpylowa
CONFEZIONE / CODICE:

GUANTI MONOUSO IN NITRILE “MASTER”

DESCRIZIONE DEL PRODOTTO:

Durevole e resistente al momentaneo effetto dei solventi.
Non contengono siliconi.
Disponibili in confezione da 100 pezzi.

Ochrona BHP rękawiczki nitrylowe MASTER

CONFEZIONE / CODICE:

PROTEZIONE OHS – GUANTI MONOUSO IN NITRILE

DESCRIZIONE DEL PRODOTTO:

Durevole e resistente al momentaneo effetto dei solventi.
Non contengono siliconi.
Disponibile in confezioni a portata di mano di 3 coppie o in un cartone di 100 pezzi.

Ochrona BHP rekawice nitrylowe TROTON STANDARD
CONFEZIONE / CODICE:

WORKWEAR – SINGLE USE

CONFEZIONE / CODICE:

Fleece jumpsuit with hood. Protects against dust and liquid chemical products such as paints, primers.

Ochrona BHP kombinezon bialy jednorazowy
VOLUME / CODICE:

COLORE:

POLYESTER WORKWEAR (blue) reusable overall

DESCRIZIONE DEL PRODOTTO:

To be used for protect outerwear from  dirt or damage during paint work.  Doesn’t protect skin from the harmful effects of hazardous substances

Ochrona BHP kombinezon granatowy wielokrotnego użytku

CONFEZIONE / CODICE:

COLORE:

PASTE HAND WASHING

DESCRIZIONE DEL PRODOTTO:

Paste with an abrasive agent. Made with natural solvents from citrus fruits, as well as specially selected components for hand washing: printer’s ink, soot, car lacquer, cement, grease, graphite oils, etc. The swashed skin is soft and elastic. Does not irritate skin. Ecological product. Does not contain sand. PH 6.0-7.0

Ochrona BHP pasta do mycia rąk 500g

CONFEZIONE / CODICE:


Condividi:

Avete domande?
Ti risponderemo il prima possibile
 
Vedi anche
Altri prodotti in questa categoria

Le nostre FAQ
Risposte alle domande più frequenti

Do you have to paint the scratched side of the boat?

If the scratches are not deep, then we can renew the scratched side by polishing with Sea-Line polishing pastes. Above the waterline, when the scratches are not deep, the surface can be repaired with a DRY FAST gel coat filler. Deep scratches should be filled with epoxy filler (selected depending on the requirements of the scratched surface), painted with a primer and then painted with topcoat.

Why did the polyurethane topcoat become dull?

Possible causes

  • Too short time for evaporation of the thinner,

How to prevent

  • Maintain the right conditions for complete evaporation of the thinner,

How to remove

  • Mat the surface, degrease and apply the paint according to the rule (right conditions and thinning proportions)
  • Polish surface if needed.

Can I add some thinner to antifouling paint?

There is a possibility of thinning antifouling, but we do not recommend this procedure due to the risk of reducing the effectiveness of the paint. If it is necessary to thin the antifouling paint, it is recommended to dilute it to a maximum of 0-5% (by volume).

La nostra offerta
Familiarizzate con la nostra offerta di materiali e vernici per la costruzione di barche
Exit
Przewiń na górę