Linguaggio:

Recommendation for LIGHTWEIGHT EPOXY FILLER – Sea Line

Home » Recensioni » Recommendation for LIGHTWEIGHT EPOXY FILLER – Sea Line
Szpachlówki do łodzi
Recommendation for LIGHTWEIGHT EPOXY FILLER – Sea Line

Lightweight epoxy filler Sea-Line  was used also in our last custom sailing boat – catamaran Wave 58.

It’s very good material to finishing aluminum and composite structure. During few years of testing and using Sea Lines product we don’t have any complaint.

Bartosz Puchowski

www.creeyacht.pl


Condividi:

Vedi anche
Altre discussioni in questa categoria

Le nostre FAQ
Risposte alle domande più frequenti

Do you have to paint the scratched side of the boat?

If the scratches are not deep, then we can renew the scratched side by polishing with Sea-Line polishing pastes. Above the waterline, when the scratches are not deep, the surface can be repaired with a DRY FAST gel coat filler. Deep scratches should be filled with epoxy filler (selected depending on the requirements of the scratched surface), painted with a primer and then painted with topcoat.

Can I purchase products directly from you?

We do not sell retail. Our products can be found in many stores in Poland and abroad. Our distributors run stationary and online stores. The full list of distributors and contacts can be found on our website at the following link click here.

Why the resin does not harden?

Possible causes

  • Too low temperature of ambitne,
  • Incorrect proportion of base and herdener,
  • Mixing two components from two different manufacturers

How to prevent

  • Apply the correct proportions of components
  • Maintain steady temperature (around 20ﹾC) during whole hardening process,
  • Mix the products thoroughly and bleed the mixture.

How to remove

  • The uncured mass requires complete removal from the surface.
La nostra offerta
Familiarizzate con la nostra offerta di materiali e vernici per la costruzione di barche
Exit
Przewiń na górę