Linguaggio:

Boot Düsseldorf

Home » Notizie » Boot Düsseldorf
Farby szkutnicze
Boot Düsseldorf

Boot Düsseldorf

Welcome to the 50th International Boat Show Düsseldorf, short boot is the world’s largest and most important international
Boat Fair takes place annually in January on the grounds of Messe Düsseldorf.

The boot Düsseldorf celebrates from 19.-27. January 2019 her 50th Anniversary: 50 years of magical moments and moving stories, 50 years of impressive boats and yachts, trends in all areas of water sports and 50 years of enthusiastic visitors who love the element of water.

We are particularly pleased to participate in the boat this year and celebrate 10 years of SEA-LINE in the anniversary year.
Celebrate with us and meet us at the booth of Yachticon A. Nagel GmbH in hall 11, booth 11 F10.

We look forward to seeing you!

More info >>> Boot Dusseldorf

Düsseldorf

Düsseldorf


Condividi:

Vedi anche
Altre discussioni in questa categoria

Le nostre FAQ
Risposte alle domande più frequenti

Can I add some thinner to antifouling paint?

There is a possibility of thinning antifouling, but we do not recommend this procedure due to the risk of reducing the effectiveness of the paint. If it is necessary to thin the antifouling paint, it is recommended to dilute it to a maximum of 0-5% (by volume).

Can I use selfpolishing Sea-Line and HARD Sea-Line antifoulings on aluminium boat?

Sea-Line HARD and Sea-Line self-polishing antifouling are not intended for aluminum surfaces. They include copper oxide, which in contact with aluminum causes galvanic corrosion. Especially on aluminum, we offer ALU-PLUS self-polishing anti-fouling paint, which, in addition to excellent adhesion to aluminum, is also 30% more effective than traditional anti-fouling paints.

Why the resin does not harden?

Possible causes

  • Too low temperature of ambitne,
  • Incorrect proportion of base and herdener,
  • Mixing two components from two different manufacturers

How to prevent

  • Apply the correct proportions of components
  • Maintain steady temperature (around 20ﹾC) during whole hardening process,
  • Mix the products thoroughly and bleed the mixture.

How to remove

  • The uncured mass requires complete removal from the surface.
La nostra offerta
Familiarizzate con la nostra offerta di materiali e vernici per la costruzione di barche
Exit
Przewiń na górę