Lengua:

Disolvente para productos epoxi

Página web » Productos » Extras » Disolvente para productos epoxi
Kosmetyki do naprawy łodzi oraz jachtów
Disolvente para productos epoxi

Disolvente los trabajos es muy importante utilizar el disolvante adecuado lo que proporciona los parámetros apropiados de la pintura – fluidez, tiempo de trabajo,
la velocidad de secado.

Embalaje :


Epoxy Lightprimer 5:1brocha, rodillo5-25%
pistola5-50%
Epoxy HS Antyosmotic 3:2brocha, rodillo0-5%
pistolaNo recomendado
Epoxy Anticorrosiv 4:1brocha, rodillo5-25%
pistola5-50%
Epoxy Woodprimer 10:4brocha, rodillo0-5%
pistola20-30%

Información técnica:


Compartir:

¿Tienes alguna pregunta?
Le responderemos lo antes posible
 
Ver también
Otros productos de esta categoría

Nuestras FAQ
Respuestas a las preguntas más frecuentes

Can I add some thinner to antifouling paint?

There is a possibility of thinning antifouling, but we do not recommend this procedure due to the risk of reducing the effectiveness of the paint. If it is necessary to thin the antifouling paint, it is recommended to dilute it to a maximum of 0-5% (by volume).

Can I use selfpolishing Sea-Line and HARD Sea-Line antifoulings on aluminium boat?

Sea-Line HARD and Sea-Line self-polishing antifouling are not intended for aluminum surfaces. They include copper oxide, which in contact with aluminum causes galvanic corrosion. Especially on aluminum, we offer ALU-PLUS self-polishing anti-fouling paint, which, in addition to excellent adhesion to aluminum, is also 30% more effective than traditional anti-fouling paints.

Is it necessary to always sand the surface between application of two different products?

We recommend to always sand the surface between applying two different products to ensure uniform surface roughness and adhesion of subsequent layers. The sanded surface should also be cleaned and degreased.

Nuestra oferta
Consulte nuestra oferta de materiales y pinturas para la construcción de embarcaciones
Exit
Przewiń na górę