Γλώσσα:

Αραιωτικά για όλα Sea-Line αστάρια εποξειδικού μίγματος

Ιστοσελίδα » Προϊόντα » Συμπληρωματικά προϊόντα » Αραιωτικά για όλα Sea-Line αστάρια εποξειδικού μίγματος
Farby antyporostowe
Αραιωτικά για όλα Sea-Line αστάρια εποξειδικού μίγματος

Αραιωτικά για όλα Sea-Line αστάρια εποξειδικού μίγματος Αραιωτικά για όλα Sea-Line αστάρια εποξειδικού μίγματος.
Είναι πολύ σημαντικό για να χρησιμοποιήσετε τα αραιωτικά χρωμάτων, που παρέχουν τις κατάλληλες παραμέτρους της ροής χρώματος, χρόνος ζωής αναμεμειγμένου χρώματος, χρόνος στεγνώματος.

Συσκευασία :


Epoxy Lightprimer 5:1Brush / Roll5-25%
Spray gun5-50%
Epoxy Antyosmotic HS 3:2Brush / Roll0-5%
Spray gunNot recommended
Epoxy Anticorrosiv 4:1Brush / Roll5-25%
Spray gun5-50%
Epoxy Woodprimer 10:4Brush / Roll0-5%
Spray gun20-30%

Μετοχή:

Έχετε ερωτήσεις;
Θα απαντήσουμε το συντομότερο δυνατό
 
Δείτε επίσης
Άλλα προϊόντα αυτής της κατηγορίας

Οι συχνές ερωτήσεις μας
Απαντήσεις σε συνήθεις ερωτήσεις

Why the paint does not have the right flow?

Possible causes

  • No thinning, wrong thinner or wrong amount of thinner
  • Wrong type of roll or brush (wrong bristle lenght)
  • Applying too much or too Little paint,
  • During painting process temperature was too high or the air was too dry,
  • Incorrect preparation of too porous surface,
  • Incorrect proportion of thinner.

How to prevent

  • Use a brush/Toller suited to the type of surface or paint,
  • Use thinner which is dedicated to the type of application and paints
  • Use thinning proportions which was indicated by manufacturer,
  • Paint in right atmosphere conditions indicated by manufacturer,

How to remove

  • Grind, clean and paint again.

Is it necessary to always sand the surface between application of two different products?

We recommend to always sand the surface between applying two different products to ensure uniform surface roughness and adhesion of subsequent layers. The sanded surface should also be cleaned and degreased.

Why did the polyurethane topcoat become dull?

Possible causes

  • Too short time for evaporation of the thinner,

How to prevent

  • Maintain the right conditions for complete evaporation of the thinner,

How to remove

  • Mat the surface, degrease and apply the paint according to the rule (right conditions and thinning proportions)
  • Polish surface if needed.
Η προσφορά μας
Εξοικειωθείτε με την προσφορά μας σε υλικά και χρώματα ναυπήγησης σκαφών
Exit
Przewiń na górę