Γλώσσα:

Products – epoxy primers

Ιστοσελίδα » Λήψεις » Products – epoxy primers
Producent farb jachtowych
FILE NAMEDOWNLOAD
TDSSDS
PRODUCTHARDENER
(comp. A)(comp. B)
EPOXY LIGHTPRIMER 5:1 (multifunctional)downloadλήψειςλήψεις
EPOXY PRIMER HS 3:2 (antiosmotic)downloadλήψειςλήψεις
EPOXY PRIMER 4:1 (anticorrosion)downloadλήψειςλήψεις
THINNER for epoxy primersXλήψειςX
EPOXY PRIMER SPRAY (2K)downloadλήψειςX
UNIVERSAL YACHTPRIMER 1KdownloadλήψειςX
THINNER 1K (for primer, varnish, enamel)XλήψειςX

Οι συχνές ερωτήσεις μας
Απαντήσεις σε συνήθεις ερωτήσεις

Why the paint does not have the right flow?

Possible causes

  • No thinning, wrong thinner or wrong amount of thinner
  • Wrong type of roll or brush (wrong bristle lenght)
  • Applying too much or too Little paint,
  • During painting process temperature was too high or the air was too dry,
  • Incorrect preparation of too porous surface,
  • Incorrect proportion of thinner.

How to prevent

  • Use a brush/Toller suited to the type of surface or paint,
  • Use thinner which is dedicated to the type of application and paints
  • Use thinning proportions which was indicated by manufacturer,
  • Paint in right atmosphere conditions indicated by manufacturer,

How to remove

  • Grind, clean and paint again.

Can I add more hardener to speed up the reaction?

Do not add more hardener, because after the base has cured, the remaining hardener will react with subsequent layers, which will be applied to the surface and cause defects. For the product to work properly, please follow the proportions given by the manufacturer.

Why despite the use of antifouing paint the bottom of the boat is overgrown?

Possible causes

  • Too thin layer of antifouling paint,
  • Choosing the wrong antifouling to type of a boat or yacht
  • Thinning of antifouling paint,
  • Incorrect surface preparation before antifouling application.

How to prevent

  • Apply the right layer thickness of paint indicated by manufacturer,
  • Choose antifouling dedicated to type of boat or yacht and suitable for the type of water,
  • Do not thin antifouling because of the risk of reducing effectiveness,
  • Careful surface preparations (grinding, clearing, degreasing),

How to remove

  • Wet grinding, apply new layers of antifouling paint.
  • Use C1 shell and fouling remover.
Η προσφορά μας
Εξοικειωθείτε με την προσφορά μας σε υλικά και χρώματα ναυπήγησης σκαφών
Exit
Przewiń na górę