Linguaggio:

DILUENTE PER TUTTI I PRIMER EPOSSIDICI

Home » Prodotti » Accessori » DILUENTE PER TUTTI I PRIMER EPOSSIDICI
Zabezpieczenie łodzi
DILUENTE PER TUTTI I PRIMER EPOSSIDICI

DESCRIZIONE DEL PRODOTTO:

DILUENTE PER APPLICAZIONE A SPRUZZO che conferiscono al prodotto le giuste caratteristiche di scorrevolezza nell’applicazione , durata della miscela e tempo di asciugatura.

INFORMACIONI DI BASE:

Diluente per tutti i primer epossidici


PRIMER EPOSSIDICO :Diluizione raccomandata

per applicazione a spruzzo

LIGHTPRIMER  5 : 1 pennello / rollo pistola a spruzzo
 5-25%5-50%
PREVENZIONE OSMOSI HS 3 : 2 pennello / rollo pistola a spruzzo
 0-5%NON CONSIGLIATO
ANTICORROSIONE 4 : 1 pennello / rollo pistola a spruzzo
 5-25%5-5o%
PER LEGNO 10:4 pennello / rollo pistola a spruzzo
 0-5% 20-30%

CONFEZIONE / CODICE:

APPLICACIONE:

Diluente per :

INFORMAZIONI TECNICHE:


Condividi:

Avete domande?
Ti risponderemo il prima possibile
 
Vedi anche
Altri prodotti in questa categoria

Le nostre FAQ
Risposte alle domande più frequenti

Do you have to paint the scratched side of the boat?

If the scratches are not deep, then we can renew the scratched side by polishing with Sea-Line polishing pastes. Above the waterline, when the scratches are not deep, the surface can be repaired with a DRY FAST gel coat filler. Deep scratches should be filled with epoxy filler (selected depending on the requirements of the scratched surface), painted with a primer and then painted with topcoat.

Contamination in topcoat paint?

Possible causes

  • Inaccurate surface cleaning before paint application,
  • Incorrect painting tools preparation (brush and roll),
  • Performing work in a place exposed to constant contact with dust.

How to prevent

  • Careful surface preparation (grinding, clearing, degreasing),
  • Careful painting tools preparation before use,
  • Maintain clean work environment

How to remove

  • Grind, clean and paint again.

Can I add more hardener to speed up the reaction?

Do not add more hardener, because after the base has cured, the remaining hardener will react with subsequent layers, which will be applied to the surface and cause defects. For the product to work properly, please follow the proportions given by the manufacturer.

La nostra offerta
Familiarizzate con la nostra offerta di materiali e vernici per la costruzione di barche
Exit
Przewiń na górę