Lengua:

Imprimaciones: epoxi, 1K

Página web » Descargas » Imprimaciones: epoxi, 1K
Farby antyporostowe
NOMBRE DEL ARCHIVODESCARGAS
TDSSDS
PRODUCTOENDURECEDOR
(comp. A)(comp. B)
EPOXY LIGHTPRIMER 5:1 (multifuncional)descargasdescargasdescargas
EPOXY PRIMER HS 3:2 (antiosmósis)descargasdescargasdescargas
EPOXY PRIMER 4:1 (anticorrosion)descargasdescargasdescargas
THINNER for epoxy primers (disolvente)XdescargasX
EPOXY PRIMER SPRAY (2K)downloaddescargasX
UNIVERSAL YACHTPRIMER 1KdownloaddescargasX
THINNER 1K (for primer, varnish, enamel)XdescargasX

Nuestras FAQ
Respuestas a las preguntas más frecuentes

Can I add some thinner to antifouling paint?

There is a possibility of thinning antifouling, but we do not recommend this procedure due to the risk of reducing the effectiveness of the paint. If it is necessary to thin the antifouling paint, it is recommended to dilute it to a maximum of 0-5% (by volume).

Why the epoxy filler does not harden?

Possible causes

  • Incorrect proportion of base and herdener,
  • Too low temperature of ambient and surface (less than 10ﹾC),
  • Mixing two components from two different manufacturers,

How to prevent

  • Apply the correct proportions of components
  • Maintain steady temperature (around 20ﹾC) during the whole hardening process,
  • Use base and hardener from the same manufacturer

How to remove

  • The uncured mass requires complete removal from the surface.

Can I use universal thinner?

We do not recommend using universal thinners. The use of a thinner with an unknown composition may result in loss of adhesion, lack of proper flow of paint and varnish defects.

Nuestra oferta
Consulte nuestra oferta de materiales y pinturas para la construcción de embarcaciones
Exit
Przewiń na górę