Lengua:

WE SWITCH S3 TO NEW VERSION. WHY?

Página web » Noticias y promociones » WE SWITCH S3 TO NEW VERSION. WHY?
Zabezpieczenie łodzi
WE SWITCH S3 TO NEW VERSION. WHY?

WE SWITCH S3 TO NEW VERSION. WHY?

Analyzing the most common use of S3 liquid so far we have come to the conclusion that our customers use it primarily to clean the surface after polishing, and for protection is preferable to use wax S4.
We concluded to modified S3 liquid to meet the needs of our customers and produced the next generation S3 FINISH CLEANER product.
The new S3 FINISH CLEANER:

– removes the remnants of polishing dust from the surface,

– allows check quality of the polished surface

– used as final step of the polishing process to significantly emphasize the gloss.

Does not contain silicone, teflon and fillers.
Used together with other Sea-Line polishing materials, gives excellent results on gelcoats and lacquered surfaces.

More information : S3 Finish Cleaner


Compartir:

Ver también
Otros hilos de esta categoría

Nuestras FAQ
Respuestas a las preguntas más frecuentes

Why are the streaks formed?

Possible causes

  • Wrong viscosity and spraying technique,
  • Failure to maintain proper evaporation time and thickness of layers,
  • Incorrect spraying pressure,
  • Too low temperature of varnish, surface or space ,
  • Wrong thinner or hardener.

How to prevent

  • Apply the right type of application method indicated by manufacturer,
  • Use working spray guns,
  • Both the object and material must have room temperature of 20ﹾC,
  • Apply correct proportion of base and hardener.

How to remove

  • Grinding and polishing,
  • Grinding and painting,

Can I purchase products directly from you?

We do not sell retail. Our products can be found in many stores in Poland and abroad. Our distributors run stationary and online stores. The full list of distributors and contacts can be found on our website at the following link click here.

Is it necessary to always sand the surface between application of two different products?

We recommend to always sand the surface between applying two different products to ensure uniform surface roughness and adhesion of subsequent layers. The sanded surface should also be cleaned and degreased.

Nuestra oferta
Consulte nuestra oferta de materiales y pinturas para la construcción de embarcaciones
Exit
Przewiń na górę