Lengua:

Disolvante para aplicaciones brocha/rodillo

Página web » Productos » Extras » Disolvante para aplicaciones brocha/rodillo
Szpachlówki do łodzi
Disolvante para aplicaciones brocha/rodillo

Disolvante para aplicaciones brocha/rodillo pinturas y barnices superficiales

Disolvante los trabajos es muy importante utilizar el disolvante adecuado lo que proporciona los parámetros apropiados de la pintura – NIVELACIÓN, tiempo de trabajo, la velocidad de secado.

DISOLVANTE PARA aplicaciones a brocha  y rodillo pinturas y barnices superficiales  de poliuretano de color y transparentes :


Embalaje :250 ml1 l
Código :71155746
Aplicación :brocha, rodillo
ColorRAL
Blanco
CrudoAzul		____

1015

20–25%
Rojo

Azul marino

Verde

Gris

Negro

3003

5003

6029

7000

9005

15-20%
Barniz – Imprimaciónx15-20 %
Barniz – Top coatx0-5 %

Información técnica:


Compartir:

¿Tienes alguna pregunta?
Le responderemos lo antes posible
 
Ver también
Otros productos de esta categoría

Nuestras FAQ
Respuestas a las preguntas más frecuentes

Why the paint does not have the right flow?

Possible causes

  • No thinning, wrong thinner or wrong amount of thinner
  • Wrong type of roll or brush (wrong bristle lenght)
  • Applying too much or too Little paint,
  • During painting process temperature was too high or the air was too dry,
  • Incorrect preparation of too porous surface,
  • Incorrect proportion of thinner.

How to prevent

  • Use a brush/Toller suited to the type of surface or paint,
  • Use thinner which is dedicated to the type of application and paints
  • Use thinning proportions which was indicated by manufacturer,
  • Paint in right atmosphere conditions indicated by manufacturer,

How to remove

  • Grind, clean and paint again.

Can I use selfpolishing Sea-Line and HARD Sea-Line antifoulings on aluminium boat?

Sea-Line HARD and Sea-Line self-polishing antifouling are not intended for aluminum surfaces. They include copper oxide, which in contact with aluminum causes galvanic corrosion. Especially on aluminum, we offer ALU-PLUS self-polishing anti-fouling paint, which, in addition to excellent adhesion to aluminum, is also 30% more effective than traditional anti-fouling paints.

Can I add some thinner to antifouling paint?

There is a possibility of thinning antifouling, but we do not recommend this procedure due to the risk of reducing the effectiveness of the paint. If it is necessary to thin the antifouling paint, it is recommended to dilute it to a maximum of 0-5% (by volume).

Nuestra oferta
Consulte nuestra oferta de materiales y pinturas para la construcción de embarcaciones
Exit
Przewiń na górę