Γλώσσα:

Αραιωτικό με πινέλο / ρολλό topcoats πολυουρεθάνης

Ιστοσελίδα » Προϊόντα » Συμπληρωματικά προϊόντα » Αραιωτικό με πινέλο / ρολλό topcoats πολυουρεθάνης
Producent farb jachtowych
Αραιωτικό με πινέλο / ρολλό topcoats πολυουρεθάνης

Αραιωτικό εφαρμογής με πινέλο / ρολλό πολυουρεθάνης τελικών χρωμάτων topcoats έγχρωμο και άχρωμο

όταν σε μια εφαρμογή είναι πολύ σημαντικό για να χρησιμοποιήσετε ένα διαλύτη που θα εξασφαλίζει την ορθή εκτέλεση του χρωματισμού – ροής, χρόνος, ταχύτητα ξήρανσης.


Package:250 ml1 l
Code :71155746
COLORRAL
____ – Ασπρο

Εκρού

Μπλέ

____

1015

5015

20–25%
Κόκκινο

βαθυγάλαζος

Πράσινο

Γκρι

Μαύρο

3003

5003

6029

7000

9005

15-20%
Poliurethane
Clear Coat
PRIMER function
x15-20 %
Poliurethane
Clear Coat
TOPCOAT function
 x0-5 %

Μετοχή:

Έχετε ερωτήσεις;
Θα απαντήσουμε το συντομότερο δυνατό
 
Δείτε επίσης
Άλλα προϊόντα αυτής της κατηγορίας

Οι συχνές ερωτήσεις μας
Απαντήσεις σε συνήθεις ερωτήσεις

Do you have to paint the scratched side of the boat?

If the scratches are not deep, then we can renew the scratched side by polishing with Sea-Line polishing pastes. Above the waterline, when the scratches are not deep, the surface can be repaired with a DRY FAST gel coat filler. Deep scratches should be filled with epoxy filler (selected depending on the requirements of the scratched surface), painted with a primer and then painted with topcoat.

Can I use selfpolishing Sea-Line and HARD Sea-Line antifoulings on aluminium boat?

Sea-Line HARD and Sea-Line self-polishing antifouling are not intended for aluminum surfaces. They include copper oxide, which in contact with aluminum causes galvanic corrosion. Especially on aluminum, we offer ALU-PLUS self-polishing anti-fouling paint, which, in addition to excellent adhesion to aluminum, is also 30% more effective than traditional anti-fouling paints.

Why the epoxy filler does not harden?

Possible causes

  • Incorrect proportion of base and herdener,
  • Too low temperature of ambient and surface (less than 10ﹾC),
  • Mixing two components from two different manufacturers,

How to prevent

  • Apply the correct proportions of components
  • Maintain steady temperature (around 20ﹾC) during the whole hardening process,
  • Use base and hardener from the same manufacturer

How to remove

  • The uncured mass requires complete removal from the surface.
Η προσφορά μας
Εξοικειωθείτε με την προσφορά μας σε υλικά και χρώματα ναυπήγησης σκαφών
Exit
Przewiń na górę