Lengua:

CINTA DE BARNIZAR

Página web » Productos » Extras » CINTA DE BARNIZAR
Farby dla jachtów


CINTA DE BARNIZAR

La cinta de barnizar de alta calidad  a base de diluyentes, con perfecta adhesión a los materiales artificiales y al metal. Adecuada para los arreglos de coche con la temperatura que no pasa a los 80 °C .
Soporte: papel crepé saturado amarillo,
adhesivo: caucho, K espesura: 0,12mm od

tasma lakiernicza

19 mm x 50 m300000530
25 mm x 50 m300000531
30 mm x 50 m300000532
38 mm x 50 m300000533
50 mm x 50 m300000534

CINTA DE BARNIZAR IMPERMEABLE MASTER

La cinta de barnizar de alta calidad  a base de diluyentes, con perfecta adhesión a los materiales artificiales y al metal. Adecuada para los arreglos de coche con la temperatura que no pasa a los 120°C .

tasma aqua

25 mm x 50 m300002043

CINTA  UNIVERSAL – PLATA

Cinta muy fuerte de uso universal, de 50mm de ancho y con una longitud de 25m que se pega a todo: metal, plástico, goma. Es impermeable, de color plata, ideal para aplicar en la industria automovilistica, en el hogar.

tasma uniwersalna

25 mm x 50 m300002931

Compartir:

¿Tienes alguna pregunta?
Le responderemos lo antes posible
 
Ver también
Otros productos de esta categoría

Nuestras FAQ
Respuestas a las preguntas más frecuentes

Why the paint does not have the right flow?

Possible causes

  • No thinning, wrong thinner or wrong amount of thinner
  • Wrong type of roll or brush (wrong bristle lenght)
  • Applying too much or too Little paint,
  • During painting process temperature was too high or the air was too dry,
  • Incorrect preparation of too porous surface,
  • Incorrect proportion of thinner.

How to prevent

  • Use a brush/Toller suited to the type of surface or paint,
  • Use thinner which is dedicated to the type of application and paints
  • Use thinning proportions which was indicated by manufacturer,
  • Paint in right atmosphere conditions indicated by manufacturer,

How to remove

  • Grind, clean and paint again.

Do you have to paint the scratched side of the boat?

If the scratches are not deep, then we can renew the scratched side by polishing with Sea-Line polishing pastes. Above the waterline, when the scratches are not deep, the surface can be repaired with a DRY FAST gel coat filler. Deep scratches should be filled with epoxy filler (selected depending on the requirements of the scratched surface), painted with a primer and then painted with topcoat.

Why the resin does not harden?

Possible causes

  • Too low temperature of ambitne,
  • Incorrect proportion of base and herdener,
  • Mixing two components from two different manufacturers

How to prevent

  • Apply the correct proportions of components
  • Maintain steady temperature (around 20ﹾC) during whole hardening process,
  • Mix the products thoroughly and bleed the mixture.

How to remove

  • The uncured mass requires complete removal from the surface.
Nuestra oferta
Consulte nuestra oferta de materiales y pinturas para la construcción de embarcaciones
Exit
Przewiń na górę