Non skid powder is anadditive for polyurethane topcoats. Non-slip powder = 20 grams, the amount for 750 ml of polyurethane or other surface topcoats. Add powder to the mixture, mix well and wait 15 minutes. Apply with a short-haired roller. During application, paint must be mixed often.
Dose for can 0,75l.
Pack 20g | code 5474 |
PRODUCT DISCRIPTION : O1 TEAK OIL is one-component oil for exotic wood which is difficult to impregnate, e.g.: teakwood, mahogany, […]
Thinner for all Sea-Line epoxy primers. It is very important to use paint thinners, which provide the appropriate parameters of […]
It is very important to use paint thinners, which provide the appropriate parameters of paint – flow, potlife, time of […]
Brush and roll thinner for polyurethane color and high gloss polyurethane clear coat. Thinner for the application of brush and […]
We do not recommend using universal thinners. The use of a thinner with an unknown composition may result in loss of adhesion, lack of proper flow of paint and varnish defects.
We do not sell retail. Our products can be found in many stores in Poland and abroad. Our distributors run stationary and online stores. The full list of distributors and contacts can be found on our website at the following link click here.
Refilling and to tackle inequalities caused by damage to or during the course of production
Protects boat surfaces from the effects of destructive activities osmosis and corrosion
Provide an aesthetic and a perfect look of the boat also protective against water and UV radiation
Protect the hull from fouling with algae and shells
Effectively remove scratches, refresh the color of gelcoat or paint, fast shine effect
Special preparations for effective cleaning and refinishing
Laminating, gluing and filling in cracks in gelcoat
Range of products useful in the boat builder work