Language:

TAPES

Naprawa łodzi


MASKING TAPE

High-quality masking tape characterized by very good adhesion on irregular surfaces, easy to remove without leave any  adhesive residue. Saturated paper backing makes tape compatible with most common paints and lacquers. Heat resistant up to 800C. Backing: yellow saturated crepe paper, adhesive: rubber solvent based.
tasma lakiernicza

19 mm x 50 m300000530
25 mm x 50 m300000531
30 mm x 50 m300000532
38 mm x 50 m300000533
50 mm x 50 m300000534

MASKING TAPE – MASTER “AQUA”

tasma aqua

25 mm x 50 m300002043

SILVER TAPE – UNIVERSAL

Strong tape of universal application, of the width of 50mm and the length of 25 m, with the allocation for metal, plastic, rubber, waterproof, of silver colour, irreplaceable in automotive industry and household.

tasma uniwersalna

25 mm x 50 m300002931

Share:

Do you have any questions?
We will respond as soon as possible
 
See also
Other products in this category

Our FAQ
Answers to frequently asked questions

Why the paint does not have the right flow?

Possible causes

  • No thinning, wrong thinner or wrong amount of thinner
  • Wrong type of roll or brush (wrong bristle lenght)
  • Applying too much or too Little paint,
  • During painting process temperature was too high or the air was too dry,
  • Incorrect preparation of too porous surface,
  • Incorrect proportion of thinner.

How to prevent

  • Use a brush/Toller suited to the type of surface or paint,
  • Use thinner which is dedicated to the type of application and paints
  • Use thinning proportions which was indicated by manufacturer,
  • Paint in right atmosphere conditions indicated by manufacturer,

How to remove

  • Grind, clean and paint again.

Contamination in topcoat paint?

Possible causes

  • Inaccurate surface cleaning before paint application,
  • Incorrect painting tools preparation (brush and roll),
  • Performing work in a place exposed to constant contact with dust.

How to prevent

  • Careful surface preparation (grinding, clearing, degreasing),
  • Careful painting tools preparation before use,
  • Maintain clean work environment

How to remove

  • Grind, clean and paint again.

Is it necessary to always sand the surface between application of two different products?

We recommend to always sand the surface between applying two different products to ensure uniform surface roughness and adhesion of subsequent layers. The sanded surface should also be cleaned and degreased.

Our offer
Familiarize yourself with our offer of boatbuilding materials and paints
Exit
Przewiń na górę