Lengua:

NEW OFFER! Antifouling for aluminium

Página web » Noticias y promociones » NEW OFFER! Antifouling for aluminium
Kosmetyki do naprawy łodzi oraz jachtów
NEW OFFER! Antifouling for aluminium

NEW OFFER! Selfpolishing Antifouling for aluminium boats.
Recommended for salty and sweet water.
It is suitable for sailing and motor boats up to speed to 40 knots.
Recommended to protect areas below the water line. Suitable for all kind of boats up to 40 knots of speed.
Extremely effective, very high performance
It can be applied on:

No risk of galvanic corrosion on aluminium surfaces.Paint is composed of copper oxide and resins. It does not contain tin compounds.
Performance 12 m2 per liter for coat 50μm. Can 0,75 l and 2,5 l.


Compartir:

Ver también
Otros hilos de esta categoría

Nuestras FAQ
Respuestas a las preguntas más frecuentes

Can I paint a boat, previously painted with 1 component paint, with polyurethane?

No, polyurethane is a 2-component paint (base + hardener) and after applying 2-component paint to 1-component paint, the proper adhesion of the paint to the surface will not be maintained, the paint will begin to wrinkle and surface defects will appear.

Why the paint does not have the right flow?

Possible causes

  • No thinning, wrong thinner or wrong amount of thinner
  • Wrong type of roll or brush (wrong bristle lenght)
  • Applying too much or too Little paint,
  • During painting process temperature was too high or the air was too dry,
  • Incorrect preparation of too porous surface,
  • Incorrect proportion of thinner.

How to prevent

  • Use a brush/Toller suited to the type of surface or paint,
  • Use thinner which is dedicated to the type of application and paints
  • Use thinning proportions which was indicated by manufacturer,
  • Paint in right atmosphere conditions indicated by manufacturer,

How to remove

  • Grind, clean and paint again.

Why are the streaks formed?

Possible causes

  • Wrong viscosity and spraying technique,
  • Failure to maintain proper evaporation time and thickness of layers,
  • Incorrect spraying pressure,
  • Too low temperature of varnish, surface or space ,
  • Wrong thinner or hardener.

How to prevent

  • Apply the right type of application method indicated by manufacturer,
  • Use working spray guns,
  • Both the object and material must have room temperature of 20ﹾC,
  • Apply correct proportion of base and hardener.

How to remove

  • Grinding and polishing,
  • Grinding and painting,
Nuestra oferta
Consulte nuestra oferta de materiales y pinturas para la construcción de embarcaciones
Exit
Przewiń na górę