Lengua:

Epoxy repair kit NEW

Farby szkutnicze
Epoxy repair kit NEW

Para obtener un laminado de máxima calidad y de dureza adecuada se debe usar la proporción de peso 2:1 de resina a tejidos de fibra de vidrio en polvo o en relación de peso 1: 1 de resina a tejidos de fibra de vidrio.
Para el proceso de acabado se recomienda usar masillas Epoxi Sea-Line®, Imprimaciones Epoxi Sea-Line®, pinturas superficiales Sea-Line®.


Tipo de embarcaciónLaminado, madera, acero, aluminio
LugarPor encima por debajo de la linea de flotación
Funciónreparar, laminación, refuerzo, encolado
Applicationbrocha, rodillo
DiluiciónNo recomendado
Número de capasDependerá de las necesidades
Tiempo de trabajo 23°C45 min
Tiempo de curado7 h
ColorClara (transparente)
Embalaje250 g
Código3636

Kit 250 g:

INFORMACIONES TÉCNICAS:


Compartir:

¿Tienes alguna pregunta?
Le responderemos lo antes posible
 
Ver también
Otros productos de esta categoría

Nuestras FAQ
Respuestas a las preguntas más frecuentes

Why did the polyurethane topcoat become dull?

Possible causes

  • Too short time for evaporation of the thinner,

How to prevent

  • Maintain the right conditions for complete evaporation of the thinner,

How to remove

  • Mat the surface, degrease and apply the paint according to the rule (right conditions and thinning proportions)
  • Polish surface if needed.

Why the paint does not have the right flow?

Possible causes

  • No thinning, wrong thinner or wrong amount of thinner
  • Wrong type of roll or brush (wrong bristle lenght)
  • Applying too much or too Little paint,
  • During painting process temperature was too high or the air was too dry,
  • Incorrect preparation of too porous surface,
  • Incorrect proportion of thinner.

How to prevent

  • Use a brush/Toller suited to the type of surface or paint,
  • Use thinner which is dedicated to the type of application and paints
  • Use thinning proportions which was indicated by manufacturer,
  • Paint in right atmosphere conditions indicated by manufacturer,

How to remove

  • Grind, clean and paint again.

Can I paint the bottom of the boat with polyurethane paint?

Yes, you can paint the bottom of the boat with polyurethane paint due to its high mechanical strength. We recommend this solution when the boat is not launched for a long time and is not exposed to fouling.

Nuestra oferta
Consulte nuestra oferta de materiales y pinturas para la construcción de embarcaciones
Exit
Przewiń na górę