Sea-Line® structural epoxy is a comprehensive application:
To obtain a full-fledged and adequately strong laminate, use a 2:1 weight ratio of resin to fibre glass mat for epoxy or a 1:1 weight ratio of resin to glass fabric.
To finish laminated surfaces we recommend using Sea-Line® epoxy fillers, Sea-Line® epoxy primers and Sea-Line® topcoats.
| Type | Laminates, wood, steel, aluminium |
| Place | Above and below waterline |
| Function | Laminating, repairs, reinforcement, gluing |
| Aplplication | Brush, roll |
| Coats number | Depend on needs |
| Pot life 23°C | 45 min |
| Hardening time | 7 h |
| Color | Clear |
| Pack | 250 g |
| Code | 3636 |
Gelcoat based on IZO/NPG resin, thanks to which it achieves good resistance to weather conditions and high mechanical properties. Primarily […]
Sea-Line® structural polyester resin is recommended for laminating, reinforcing the surface, and patching holes and damage – especially in situations […]
Sea-Line® COLOR RENOVATION COLOR RENOVATION is a product which does not contain silicon and efficiently brings back an original appearance […]
Sea-Line® structural epoxy is a comprehensive application. It works in both the construction and repair of damaged parts of the […]
We recommend to always sand the surface between applying two different products to ensure uniform surface roughness and adhesion of subsequent layers. The sanded surface should also be cleaned and degreased.
Refilling and to tackle inequalities caused by damage to or during the course of production
Protects boat surfaces from the effects of destructive activities osmosis and corrosion
Provide an aesthetic and a perfect look of the boat also protective against water and UV radiation
Protect the hull from fouling with algae and shells
Effectively remove scratches, refresh the color of gelcoat or paint, fast shine effect
Special preparations for effective cleaning and refinishing
Laminating, gluing and filling in cracks in gelcoat
Range of products useful in the boat builder work
