Lengua:

C4 LIMPIEZA DE MADERA

Página web » Productos » Productos cosméticos » C4 LIMPIEZA DE MADERA
Farby antyporostowe
C4 LIMPIEZA DE MADERA

C4 TEAK CLEANER – effective & fast

C4 LIMPIEZA DE MADERA – Restauración de madera

Concentrado muy potente, soluble en agua y biodegradable, para una rápida y eficaz eliminación de suciedad de la madera de teca.

C4 restaura el color y no deja residuos (en contraposición de productos ácidos). El producto es seguro para los selladores y adhesivos. La formula se diluye con agua en proporción 1:20 para ensuciamiento medio y 1: 10 para las manchas difíciles. Retirar la suciedad con un movimiento a lo largo de la dirección de la veta de la madera utilizando un cepillo suave.  Después del tratamiento,  enjuagar con abundante agua. La superficie proteger con aceite para teca.


Envase de concentrado :

250 ml / código: 300006981

INFORMACIONES TÉCNICAS:

STEP BY STEP – Sea-Line® C4 Teak Cleaner

How to restore wood ?

Wood, over time, may start to look like in the picture below. It can easily and quickly be restored. C4 Teak Cleaner can be used on all kinds of wood used in boatbuilding. C4 is recommended also as a compound cleaning wooden elements (benches, tables, balustrades or entresols) in a household.

STEP 1 – Soak the surface

Before you start cleaning, soak the surface thoroughly and let it absorb water.

STEP 2 – Prepare Sea-Line C4 Teak Cleaner

Thin Sea-Line C4 Teak Cleaner with water at a ratio of:

STEP 3 – Wood cleaning

Leaving C4 Teak Cleaner on the surface max. 15 minutes before starting the cleaning, will make it easier to clean it efficiently. C4 Teak Cleaner should not dry out on the surface after application.

Using a soft brush, remove contaminants moving along the growth rings.

STEP 4 – Rinse

Removed contaminants and the product residues, rinse abundantly with water. Do not let contaminants dry out on the cleaned surface.

STEP 5 – Efect after first cleaning

If necessary, fragments which were not cleaned for the first time due to high contamination and require more thorough cleaning, should be cleaned again.

STEP 6- Secure

After drying, wood can be secured with teak oil.

Sea-Line® C4 TEAK CLEANER is biodegradable, water-soluble product for quick and efficient cleaning of teak wood, exotic wood and other kinds of wood. C4 Teak restores the colour and leaves no residues difficult to remove. The product is safe for sealants and adhesives during the wood cleaning.

The picture shows a cleaned surface (right side) and its condition before using C4 Teak Cleaner (left side).


Compartir:

¿Tienes alguna pregunta?
Le responderemos lo antes posible
 
Ver también
Otros productos de esta categoría

Nuestras FAQ
Respuestas a las preguntas más frecuentes

Can I add some thinner to antifouling paint?

There is a possibility of thinning antifouling, but we do not recommend this procedure due to the risk of reducing the effectiveness of the paint. If it is necessary to thin the antifouling paint, it is recommended to dilute it to a maximum of 0-5% (by volume).

Why the resin does not harden?

Possible causes

  • Too low temperature of ambitne,
  • Incorrect proportion of base and herdener,
  • Mixing two components from two different manufacturers

How to prevent

  • Apply the correct proportions of components
  • Maintain steady temperature (around 20ﹾC) during whole hardening process,
  • Mix the products thoroughly and bleed the mixture.

How to remove

  • The uncured mass requires complete removal from the surface.

Is it necessary to always sand the surface between application of two different products?

We recommend to always sand the surface between applying two different products to ensure uniform surface roughness and adhesion of subsequent layers. The sanded surface should also be cleaned and degreased.

Nuestra oferta
Consulte nuestra oferta de materiales y pinturas para la construcción de embarcaciones
Exit
Przewiń na górę