C2 Sea-Line limpiador muy potente, soluble en agua y biodegradable, para una rápida y eficaz
eliminación de suciedad de las superficies barnizadas, laminado, aluminio, PVC y textiles.
La formula se diluye con agua en proporción 1:10 para ensuciamiento medio y 1: 5 para las manchas difíciles. Para la limpieza utilizar un paño o un cepillo suave. Después del tratamiento, enjuagar con abundante agua.
Our vessels may sometimes look like the one in the picture below. We can quickly and easily make it look nice. C2 Concentrate Cleaner can be used on all kinds of gelcoats and varnishes.
Thin Sea-Line® C2 with water at a ratio of:
o 1:5 for heavy contaminants
o 1:10 for average contaminants
Before starting work, clean the surface from contamination, e.g. sand. Using a sponge or a brush, apply C2 Concentrate Cleaner.
Non-slip surface or heavily soiled elements, scrub with a soft brush.
Removed contaminants and the product residues, rinse abundantly with water. Do not let contaminants dry out on the cleaned surface.
To increase gloss, the surface may additionally be polished by using Sea-Line S1 or Sea-line S0 compound.
The cleaned surface protect (optionally) with Sea-Line S4 Protect Wax & Sea-Line S3 Clean & Protect spray
The picture shows a cleaned surface (right side) and its condition before using C2 Concentrate Cleaner (left side).
Sea-Line® C2 CONCENTRATE CLEANER is a concentrated product for cleaning GPR off lingering contaminants. It is a very powerful biodegradable, water soluble cleaner for quick and efficient removal of contaminants from such surfaces as:
• GRP laminate
• varnished surfaces
• aluminium (masts, fittings)
• PCV (pontoons).
• rubber (reflectors, rubbing strakes, gaskets).
• textiles (tents, covers, tarpaulins).
The modern formula of Sea-Line® C2 Concentrate Cleaner combined with a possibility of diluting the product, depending on the degree of contamination, makes it ideal for removing:
• grease
• oils (also hydraulic ones),
• soot
• discolorations and damp patches caused by rainfalls
• other contaminants difficult to remove
C3 SHAMPOO WITH WAX – CLEAN AND CARE C3 CHAMPÚ CON CERA – Limpieza y protección Champú abrillantador con cera, […]
C1 BOTTOM CLEANER is a powerful, effective formula to rapidly remove dirt, rests of shells from boat hull. Application: Apply […]
C4 TEAK CLEANER – effective & fast C4 LIMPIEZA DE MADERA – Restauración de madera Concentrado muy potente, soluble en […]
PRODUCT DISCRIPTION : Sea-Line® COLOR RENOVATION COLOR RENOVATION is a product which does not contain silicon and efficiently brings back […]
Do not add more hardener, because after the base has cured, the remaining hardener will react with subsequent layers, which will be applied to the surface and cause defects. For the product to work properly, please follow the proportions given by the manufacturer.
We recommend to always sand the surface between applying two different products to ensure uniform surface roughness and adhesion of subsequent layers. The sanded surface should also be cleaned and degreased.
Para rellenar cavidades y hacer frente a las desigualdades causadas por daños o durante el curso de la producción
Barcos de superficie de impacto de las actividades de ósmosis y la corrosión destructiva en ambientes hostiles
Protección contra el agua y contra los efectos negativos de los rayos UV
Proteger la parte inferior de la embarcación antes de las incrustaciones de algas y conchas. Protección contra el agua
Eliminación efectiva de arañazos, color refrescante y gelcoat brillo o pintura
Preparaciones especializados para la limpieza y restauración efectiva
Laminación, encolado y relleno de fisuras en gelcoat
Una serie de productos útiles durante el constructor de barcos de trabajo
