Lengua:

Transpacyfik Solo

Farby antyporostowe

Romuald Koperski

A traveller, guide to Siberia, pioneer of automobile expeditions across the extensive regions of Siberia, automobile pilot, writer, journalist, photographer, diver and musician-pianist. A writer of the books: («Duel with Siberia», «Through Siberia without a Ticket «,»1001 Pictures of Siberia»), of photographic exhibitions and of many other publications on Siberia, which he has travelled the length and breadth of the country.

An originator and organiser of three editions of the automobile rally «Transsiberia», which lasted for 39 days, the longest and the most difficult automobile rally in the world «Transsiberia – Gigant 2004», Atlantic – Pacific – Atlantic, which had 30.000km.

http://www.romualdkoperski.pl


Compartir:

Ver también
Otros hilos de esta categoría

Nuestras FAQ
Respuestas a las preguntas más frecuentes

Why despite the use of antifouing paint the bottom of the boat is overgrown?

Possible causes

  • Too thin layer of antifouling paint,
  • Choosing the wrong antifouling to type of a boat or yacht
  • Thinning of antifouling paint,
  • Incorrect surface preparation before antifouling application.

How to prevent

  • Apply the right layer thickness of paint indicated by manufacturer,
  • Choose antifouling dedicated to type of boat or yacht and suitable for the type of water,
  • Do not thin antifouling because of the risk of reducing effectiveness,
  • Careful surface preparations (grinding, clearing, degreasing),

How to remove

  • Wet grinding, apply new layers of antifouling paint.
  • Use C1 shell and fouling remover.

Can I paint a boat, previously painted with 1 component paint, with polyurethane?

No, polyurethane is a 2-component paint (base + hardener) and after applying 2-component paint to 1-component paint, the proper adhesion of the paint to the surface will not be maintained, the paint will begin to wrinkle and surface defects will appear.

Why does the paint have no adhesion?

Possible causes

  • Wrong surface preparation,
  • Skipping the primer in the system application process,
  • Use of universal thinners or replacements ,
  • Paint incompatibility.

How to prevent

  • Correct surface preparation (grinding, clearing, degreasing),
  • Use primers which improve adhesion of paints,
  • Use thinners which are dedicated to each paints,
  • Use of paints which are compatible to each other.

How to remove

  • Grind, clean and paint again.
Nuestra oferta
Consulte nuestra oferta de materiales y pinturas para la construcción de embarcaciones
Exit
Przewiń na górę