HOLOGRAM REMOVAL - POLISHING INSTRUCTION

HOLOGRAM REMOVAL – POLISHING INSTRUCTION

USE:

Removal of holograms and polishing defects caused by polishing
Giving the highest surface gloss

SURFACE:

Varnishes, paints and any color gelcoat

EFECT:

Smooth, free from defects, high gloss finish without any holograms

HOLOGRAM REMOVAL – POLISHING INSTRUCTION

OTHERS POLISHING INSTRUCTION:

Practical advice:

Do not push polishing machine to surface
For the beginning do not apply too much polishing compound, grain should be ground completely during polishing process
Apply more polishing compound only when it is necessary, you will save material used to polishing process

Ver también

Otros hilos de esta categoría

LIGHT COLOR GELCOAT – POLISHING INSTRUCTION
LIGHT COLOR GELCOAT – POLISHING INSTRUCTION USE: Renewing the gelcoat surface of light color with mechanical damage and scratches that […]
LIGHT COLOR GELCOAT – POLISHING INSTRUCTION
DARK COLOR GELCOAT – POLISHING INSTRUCTION
DARK COLOR GELCOAT – POLISHING INSTRUCTION USE: Removal of discoloration, chalking gelcoat, dull Renewing any surface color which has a small […]
DARK COLOR GELCOAT – POLISHING INSTRUCTION
PAINT AND VARNISH – POLISHING INSTRUCTION
PAINT AND VARNISH – POLISHING INSTRUCTION USE: Renewing any paint or varnish color which has small mechanical damages Yellowing and […]
PAINT AND VARNISH – POLISHING INSTRUCTION
RENEWING THE SURFACE WITHOUT GRINDING
RENEWING THE SURFACE WITHOUT GRINDING – POLISHING INSTRUCTION USE: Renewal of any color with small mechanical damages and small scratches […]
RENEWING THE SURFACE WITHOUT GRINDING

Nuestras FAQ

Respuestas a las preguntas más frecuentes

Possible causes

Too thin layer of antifouling paint,
Choosing the wrong antifouling to type of a boat or yacht
Thinning of antifouling paint,
Incorrect surface preparation before antifouling application.

How to prevent

Apply the right layer thickness of paint indicated by manufacturer,
Choose antifouling dedicated to type of boat or yacht and suitable for the type of water,
Do not thin antifouling because of the risk of reducing effectiveness,
Careful surface preparations (grinding, clearing, degreasing),

How to remove

Wet grinding, apply new layers of antifouling paint.
Use C1 shell and fouling remover.

Possible causes

Incorrect proportion of base and herdener,
Too low temperature of ambient and surface (less than 10ﹾC),
Mixing two components from two different manufacturers,

How to prevent

Apply the correct proportions of components
Maintain steady temperature (around 20ﹾC) during the whole hardening process,
Use base and hardener from the same manufacturer

How to remove

The uncured mass requires complete removal from the surface.

No, polyurethane is a 2-component paint (base + hardener) and after applying 2-component paint to 1-component paint, the proper adhesion of the paint to the surface will not be maintained, the paint will begin to wrinkle and surface defects will appear.

Nuestra oferta

Consulte nuestra oferta de materiales y pinturas para la construcción de embarcaciones

Como complemento de la pérdida
Como complemento de la pérdida
Para rellenar cavidades y hacer frente a las desigualdades causadas por daños o durante el curso de la producción
Como complemento de la pérdida
Imprimaciones epoxi
Seguridad duradera
Barcos de superficie de impacto de las actividades de ósmosis y la corrosión destructiva en ambientes hostiles
Imprimaciones epoxi
Capas de acabado
La protección y la estética
Protección contra el agua y contra los efectos negativos de los rayos UV
Capas de acabado
Pintura anti-fouling
La protección de la parte inferior
Proteger la parte inferior de la embarcación antes de las incrustaciones de algas y conchas. Protección contra el agua
Pintura anti-fouling
Sistema de Pulido
Brillo y color
Eliminación efectiva de arañazos, color refrescante y gelcoat brillo o pintura
Sistema de Pulido
Productos cosméticos
Cuidado y Protección
Preparaciones especializados para la limpieza y restauración efectiva
Productos cosméticos
Resinas y kits de reparación
Reparación y laminación
Laminación, encolado y relleno de fisuras en gelcoat
Resinas y kits de reparación
Extras
Suplemento
Una serie de productos útiles durante el constructor de barcos de trabajo
Extras