Language:

HOLOGRAM REMOVAL – POLISHING INSTRUCTION

Home » Polishing instructions » HOLOGRAM REMOVAL – POLISHING INSTRUCTION

Farby dla jachtów

HOLOGRAM REMOVAL – POLISHING INSTRUCTION

HOLOGRAM REMOVAL – POLISHING INSTRUCTION

USE:

Removal of holograms and polishing defects caused by polishing
Giving the highest surface gloss

SURFACE:

Varnishes, paints and any color gelcoat

EFECT:

Smooth, free from defects, high gloss finish without any holograms

HOLOGRAM REMOVAL – POLISHING INSTRUCTION

PDF

OTHERS POLISHING INSTRUCTION:

Practical advice:

Do not push polishing machine to surface
For the beginning do not apply too much polishing compound, grain should be ground completely during polishing process
Apply more polishing compound only when it is necessary, you will save material used to polishing process

See also

Other threads in this category

LIGHT COLOR GELCOAT – POLISHING INSTRUCTION
LIGHT COLOR GELCOAT – POLISHING INSTRUCTION USE: Renewing the gelcoat surface of light color with mechanical damage and scratches that […]
LIGHT COLOR GELCOAT – POLISHING INSTRUCTION
DARK COLOR GELCOAT – POLISHING INSTRUCTION
DARK COLOR GELCOAT – POLISHING INSTRUCTION USE: Removal of discoloration, chalking gelcoat, dull Renewing any surface color which has a small […]
DARK COLOR GELCOAT – POLISHING INSTRUCTION
PAINT AND VARNISH – POLISHING INSTRUCTION
PAINT AND VARNISH – POLISHING INSTRUCTION USE: Renewing any paint or varnish color which has small mechanical damages Yellowing and […]
PAINT AND VARNISH – POLISHING INSTRUCTION
RENEWING THE SURFACE WITHOUT GRINDING
RENEWING THE SURFACE WITHOUT GRINDING – POLISHING INSTRUCTION USE: Renewal of any color with small mechanical damages and small scratches […]
RENEWING THE SURFACE WITHOUT GRINDING

Our FAQ

Answers to frequently asked questions

Possible causes

Incorrect proportion of base and herdener,
Too low temperature of ambient and surface (less than 10ﹾC),
Mixing two components from two different manufacturers,

How to prevent

Apply the correct proportions of components
Maintain steady temperature (around 20ﹾC) during the whole hardening process,
Use base and hardener from the same manufacturer

How to remove

The uncured mass requires complete removal from the surface.

Possible causes

Too short time for evaporation of the thinner,

How to prevent

Maintain the right conditions for complete evaporation of the thinner,

How to remove

Mat the surface, degrease and apply the paint according to the rule (right conditions and thinning proportions)
Polish surface if needed.

Possible causes

Inaccurate surface cleaning before paint application,
Incorrect painting tools preparation (brush and roll),
Performing work in a place exposed to constant contact with dust.

How to prevent

Careful surface preparation (grinding, clearing, degreasing),
Careful painting tools preparation before use,
Maintain clean work environment

How to remove

Grind, clean and paint again.

Our offer

Familiarize yourself with our offer of boatbuilding materials and paints

Fillers
Smooth surface
Refilling and to tackle inequalities caused by damage to or during the course of production
Fillers
Primers
Safeguard
Protects boat surfaces from the effects of destructive activities osmosis and corrosion
Primers
Topcoats
Aesthetics and beauty
Provide an aesthetic and a perfect look of the boat also protective against water and UV radiation
Topcoats
Antifouling
Bottom protection
Protect the hull from fouling with algae and shells
Antifouling
Polishing
Color and gloss
Effectively remove scratches, refresh the color of gelcoat or paint, fast shine effect
Polishing
Cosmetics
Care and protection
Special preparations for effective cleaning and refinishing
Cosmetics
Resins and repair kits
Repairs and laminating
Laminating, gluing and filling in cracks in gelcoat
Resins and repair kits
Adds
Adds
Range of products useful in the boat builder work
Adds