Language:

WIND & WATER March 2020

Home » News and promotions » WIND & WATER March 2020
Szpachlówki do łodzi
WIND & WATER March 2020

WIND & WATER 2020

Traditionally, along with the approaching spring and the upcoming season, we are happy to  invite you to visit the Wind and Water Fair.

This year’s edition will take place on March 12-15 at the new location, i.e. at the Global EXPO Trade Fair and Congress Center at ul. Modlińska 6D in Warsaw.

The meeting will be an opportunity to:

  • show how our products work
  • answer your questions about yachting paints and polishing compounds
  • help in the best solutions selection during boat renovations

Gifts are waiting for the users of our products!

See You in Warsaw!

More about event “Wiatr i Woda 2020”


Share:

See also
Other threads in this category

Our FAQ
Answers to frequently asked questions

Do you have to paint the scratched side of the boat?

If the scratches are not deep, then we can renew the scratched side by polishing with Sea-Line polishing pastes. Above the waterline, when the scratches are not deep, the surface can be repaired with a DRY FAST gel coat filler. Deep scratches should be filled with epoxy filler (selected depending on the requirements of the scratched surface), painted with a primer and then painted with topcoat.

Can I add more hardener to speed up the reaction?

Do not add more hardener, because after the base has cured, the remaining hardener will react with subsequent layers, which will be applied to the surface and cause defects. For the product to work properly, please follow the proportions given by the manufacturer.

Why the paint does not have the right flow?

Possible causes

  • No thinning, wrong thinner or wrong amount of thinner
  • Wrong type of roll or brush (wrong bristle lenght)
  • Applying too much or too Little paint,
  • During painting process temperature was too high or the air was too dry,
  • Incorrect preparation of too porous surface,
  • Incorrect proportion of thinner.

How to prevent

  • Use a brush/Toller suited to the type of surface or paint,
  • Use thinner which is dedicated to the type of application and paints
  • Use thinning proportions which was indicated by manufacturer,
  • Paint in right atmosphere conditions indicated by manufacturer,

How to remove

  • Grind, clean and paint again.
Our offer
Familiarize yourself with our offer of boatbuilding materials and paints
Exit
Przewiń na górę