Language:

Labor Day May Holiday

Home » News and promotions » Labor Day May Holiday
Farby szkutnicze
Labor Day May Holiday

Considering Polish National Holidays May 1th and May 3th our production and logistic will be closed those days.

In our industry, April and May is highest season, so for those who will need technical advice or info about nearest point of sale, please contact us:

April  27-30 from Monday till Thursday, call us from 6:30 a.m. to 1:00 p.m. and from 2:00 p.m. to 7:30 p.m.

May  4-8 from Monday till Friday, call us from 6:30 a.m. to 1:00 p.m. and from 2:00 p.m. to 7:30 p.m.

we are available at the following telephone numbers:
tel. (+48) 94 35 316 75;
tel. (+48) 94 35 316 79;
tel. (+48) 94 35 316 20;
info@sea-line.eu

For all of you around the world from all of us here at Sea-Line HAPPY LABOR DAY!


Share:

See also
Other threads in this category

Our FAQ
Answers to frequently asked questions

Why the epoxy filler does not harden?

Possible causes

  • Incorrect proportion of base and herdener,
  • Too low temperature of ambient and surface (less than 10ﹾC),
  • Mixing two components from two different manufacturers,

How to prevent

  • Apply the correct proportions of components
  • Maintain steady temperature (around 20ﹾC) during the whole hardening process,
  • Use base and hardener from the same manufacturer

How to remove

  • The uncured mass requires complete removal from the surface.

Why the paint does not have the right flow?

Possible causes

  • No thinning, wrong thinner or wrong amount of thinner
  • Wrong type of roll or brush (wrong bristle lenght)
  • Applying too much or too Little paint,
  • During painting process temperature was too high or the air was too dry,
  • Incorrect preparation of too porous surface,
  • Incorrect proportion of thinner.

How to prevent

  • Use a brush/Toller suited to the type of surface or paint,
  • Use thinner which is dedicated to the type of application and paints
  • Use thinning proportions which was indicated by manufacturer,
  • Paint in right atmosphere conditions indicated by manufacturer,

How to remove

  • Grind, clean and paint again.

Why are the streaks formed?

Possible causes

  • Wrong viscosity and spraying technique,
  • Failure to maintain proper evaporation time and thickness of layers,
  • Incorrect spraying pressure,
  • Too low temperature of varnish, surface or space ,
  • Wrong thinner or hardener.

How to prevent

  • Apply the right type of application method indicated by manufacturer,
  • Use working spray guns,
  • Both the object and material must have room temperature of 20ﹾC,
  • Apply correct proportion of base and hardener.

How to remove

  • Grinding and polishing,
  • Grinding and painting,
Our offer
Familiarize yourself with our offer of boatbuilding materials and paints
Exit
Przewiń na górę