| Type | GRP laminates, wood, steel, aluminum |
| Place | Above waterline |
| Function | Large surfaces |
| Application | Putty knife |
| Pot life 20°C | 8÷10 min |
| Hardening time 20°C | 30÷40 min |
| Color | yellow |
| Pack | code |
| 2 kg – 5 kg – 25 kg – | 4952 4600 4601 |
Two component polyester spray filler. recommended for priming fibregllas reinfoced hulls and other GFK surfaces. for filling small cracks and […]
Gelcoat based on IZO/NPG resin, thanks to which it achieves good resistance to weather conditions and high mechanical properties. Primarily […]
Epoxy filler lightweight 1:1 NEW recommended for large areas due to low own weight PRODUCT DESCRIPTION : low weight and […]
Is elastic sealant recommended for sealing and bonding various types of materials. PRODUCT DESCRIPTION: POLYMER is recomended for use on […]
We do not sell retail. Our products can be found in many stores in Poland and abroad. Our distributors run stationary and online stores. The full list of distributors and contacts can be found on our website at the following link click here.
Sea-Line HARD and Sea-Line self-polishing antifouling are not intended for aluminum surfaces. They include copper oxide, which in contact with aluminum causes galvanic corrosion. Especially on aluminum, we offer ALU-PLUS self-polishing anti-fouling paint, which, in addition to excellent adhesion to aluminum, is also 30% more effective than traditional anti-fouling paints.
Refilling and to tackle inequalities caused by damage to or during the course of production
Protects boat surfaces from the effects of destructive activities osmosis and corrosion
Provide an aesthetic and a perfect look of the boat also protective against water and UV radiation
Protect the hull from fouling with algae and shells
Effectively remove scratches, refresh the color of gelcoat or paint, fast shine effect
Special preparations for effective cleaning and refinishing
Laminating, gluing and filling in cracks in gelcoat
Range of products useful in the boat builder work
