Language:

YACHT ENAMEL 1K

Home » Products » Topcoats » YACHT ENAMEL 1K
Farby antyporostowe
YACHT ENAMEL 1K


TypeLaminates GRP, wood, steel
PlaceAbove waterline
FunctionHigh gloss
Applicationbrush, roll, spray gun
ThinningThinner for 1 – component primer, varnisch, enamel
Theoretical coverage for 1l15-16 m2 for 60 μm WFT/ 40 μm DFT
Number of coats1 ÷ 2
Dry to the touch 20°C:3 h
Dry to rain 20°C:6 h
Fully woterprof10 h
Elapsed time before applying next coat:min. 16 h
Pack0,750l125 ml
Color:code:code:
Phure white 81548166
Crem8152 –
Flame red8158 –
Gentiale blue8161 –
Jet black8163 –

During paint job is recommend to use products from one batch


Share:

Do you have any questions?
We will respond as soon as possible
 
See also
Other products in this category

Our FAQ
Answers to frequently asked questions

Can I add more hardener to speed up the reaction?

Do not add more hardener, because after the base has cured, the remaining hardener will react with subsequent layers, which will be applied to the surface and cause defects. For the product to work properly, please follow the proportions given by the manufacturer.

Why did the polyurethane topcoat become dull?

Possible causes

  • Too short time for evaporation of the thinner,

How to prevent

  • Maintain the right conditions for complete evaporation of the thinner,

How to remove

  • Mat the surface, degrease and apply the paint according to the rule (right conditions and thinning proportions)
  • Polish surface if needed.

Is it necessary to always sand the surface between application of two different products?

We recommend to always sand the surface between applying two different products to ensure uniform surface roughness and adhesion of subsequent layers. The sanded surface should also be cleaned and degreased.

Our offer
Familiarize yourself with our offer of boatbuilding materials and paints
Exit
Przewiń na górę