“The entirerefurbishmentwe decided touse the products Sea-Line®.
In my opinion, a very importantelement inthe choiceof chemicals, whichwant to usefor the repair, thecorrectselection ofthe individual layerstospecificrepairandrepaired surface(laminate, steel, woodetc.)Anotherdeterminantis thespecializedhelp ona good system.
Withall responsibility, I can say thatthe technical supportprovidedby Sea-Line® isa professional andunforced, backed bya hugetheoretical and practical knowledge, and what isalso veryimportant, I had providedexcellent contactat every stage ofrenovation. “
Michał Matulka, Jacht Traper 300, Ireland
Renovation of the Spanish motorboat Ducauto caribe “Cut in half, gutted and made according to my own concept. The work […]
Opinion of our distributor from Bulgaria, Nicolai from Watersports Equipment – Varna, who works with Sea-Line for 5 years. “Watersports […]
Opinion of our distributor from Switzerland, Jürg from ANWANDER – Näfels. ‘My name is Jürg Iselin from ANWANDER in Switzerland. […]
Opinion of our distributor from Gibraltar, Gaynor from GIBYACHTS – Gibraltar. “Wanted to take few moments to talk to you […]
It is not recommended to apply 2K paints over 1K paints. 1K and 2K inks differ in their composition and properties, including hardness, chemical resistance and durability. 1K paints are one-component and dry by evaporating the solvent, while 2K paints are two-component and need to be cured by adding a hardener. Applying 2K paint over 1K paint can cause unpredictable chemical reactions and lead to undesirable effects such as dulling, chipping or flaking of the paint. Therefore, always use paints according to the manufacturer’s instructions and do not mix different types of paints. farby zgodnie z instrukcjami producenta i nie mieszać różnych rodzajów farb.
If the scratches are not deep, then we can renew the scratched side by polishing with Sea-Line polishing pastes. Above the waterline, when the scratches are not deep, the surface can be repaired with a DRY FAST gel coat filler. Deep scratches should be filled with epoxy filler (selected depending on the requirements of the scratched surface), painted with a primer and then painted with topcoat.
There is a possibility of thinning antifouling, but we do not recommend this procedure due to the risk of reducing the effectiveness of the paint. If it is necessary to thin the antifouling paint, it is recommended to dilute it to a maximum of 0-5% (by volume).
Refilling and to tackle inequalities caused by damage to or during the course of production
Protects boat surfaces from the effects of destructive activities osmosis and corrosion
Provide an aesthetic and a perfect look of the boat also protective against water and UV radiation
Protect the hull from fouling with algae and shells
Effectively remove scratches, refresh the color of gelcoat or paint, fast shine effect
Special preparations for effective cleaning and refinishing
Laminating, gluing and filling in cracks in gelcoat
Range of products useful in the boat builder work