Lengua:

S1 PREMIUM ONE STEP, CUT & HIGH GLOSS – PASTA DE PULIR

Página web » Productos » Sistema de pulido » S1 PREMIUM ONE STEP, CUT & HIGH GLOSS – PASTA DE PULIR
Sea Line farby jachtowe
S1 PREMIUM ONE STEP, CUT & HIGH GLOSS – PASTA DE PULIR

S1 PREMIUM POLISHING COMPOUND – ONE STEP, CUT & HIGH GLOSS


NO SILICONE


TEXTURE :

PACKAGING:

APPLICATION METHODS:

PRODUCT DISCRIPTION :

Sea-Line® S1 PREMIUM guarantees obtaining a very high gloss on the surface in one-step polishing process.

S1 Premium Compound is designed for surfaces difficult to polish, such as varnishes (also polyurethane ones) plexi or polycarbonates and laminates. At the same time the used polishing grain gives a very high gloss and efficiently removes defects and grinding scratches after using sandpaper of gradation from P800. (in case of dark colours after using sandpaper of gradation <P1200).

The compound is provided in the form of liquid, it allows for a precise dosing of appropriate amount, depending on the type of the surface that is being polished.

Basic informations

Surfacegelcoat, polyurethane paints and varnishes, plexi, polycarbonate
Function

removing defects from the surface

gloss restoring

Consistencyliquid – creame paste
surface preparation *mechanical grindingmanual grinding
light colordark colorlight colordark color
gelcoatP800 ⇒P1200 ⇒P1200 ⇒P1500 ⇒
polyurethane paintP800 ⇒P1200 ⇒P1200 ⇒P1500 ⇒
plexi, polycarbonateP1500 ⇒P1500 ⇒P2000 ⇒P2000 ⇒
high hardness surfacesP1200 ⇒P1500 ⇒P1500 ⇒P2000 ⇒

* grinding paper minimal gradation

Method of use:

Surface preparation :

Clean the surface destined for polishing. If removing defects is necessary, polish the surface with sandpaper of the following gradation preliminary polishing: <P500

szlifowanie papierem P800Polish the surface with sandpaper of final gradation : P800 →.


szlifowanie papierem P1200Dark colours or hard surfaces polish the surface with sandpaper of final gradation : P1200 →.


Use applicators:

More applicators Sea-Line® / BRAYT

Wool applicators Sea-Line® :

wełna-dwustronna-2Double-sided wool Sea-Line:

(code : 300006614)


wełna-jednostronnaOne side wool Sea-line :

(code: 300006613)


Sponge applicators BRAYT:

gąbka-białaPolishing sponge «PROFI» :

(code :300005933)


gabka-polerska-na-rzep-grubaPolishing sponge whit velcro :


Special applicators Sea-Line® :

wełna-białaLamb’s wool type MM Sea-Line

  • (Ø 80 – code : 300006437)
  • (Ø 150 – code : 300005558)
  • (Ø 180 – code : 300005557)


wełna-pol.-kula-2Polishing wool BALL (80mm) Sea-Line :

(Kod : 300006619)


Polishing :

Clean the surface, apply the compound onto an element or head (wool or tough sponge)


praca rotacyjna Apply the compound at minimum rotations on the whole surface that is being polished (800-1000 rotations/min) polishing until it changes colour and the compound changes its texture


max obrotySlowly increase the speed max. to 1800 RPM working with a little pressure


Further steps :

Clean the surface. In order to protect the surface, it is recommended to use:


Technical information:


Compartir:

¿Tienes alguna pregunta?
Le responderemos lo antes posible
 
Ver también
Otros productos de esta categoría

Nuestras FAQ
Respuestas a las preguntas más frecuentes

Why the paint does not have the right flow?

Possible causes

  • No thinning, wrong thinner or wrong amount of thinner
  • Wrong type of roll or brush (wrong bristle lenght)
  • Applying too much or too Little paint,
  • During painting process temperature was too high or the air was too dry,
  • Incorrect preparation of too porous surface,
  • Incorrect proportion of thinner.

How to prevent

  • Use a brush/Toller suited to the type of surface or paint,
  • Use thinner which is dedicated to the type of application and paints
  • Use thinning proportions which was indicated by manufacturer,
  • Paint in right atmosphere conditions indicated by manufacturer,

How to remove

  • Grind, clean and paint again.

Can I use selfpolishing Sea-Line and HARD Sea-Line antifoulings on aluminium boat?

Sea-Line HARD and Sea-Line self-polishing antifouling are not intended for aluminum surfaces. They include copper oxide, which in contact with aluminum causes galvanic corrosion. Especially on aluminum, we offer ALU-PLUS self-polishing anti-fouling paint, which, in addition to excellent adhesion to aluminum, is also 30% more effective than traditional anti-fouling paints.

Can I use yacht paints for a drinking water tank?

Sea-Line yacht paints are designed for painting the surface of boats and yachts made of various materials, e.g. laminate, wood or steel. We do not have a certificate of the National Institute of Hygiene, which would allow the use of yacht paint to paint the tank with drinking water.

Nuestra oferta
Consulte nuestra oferta de materiales y pinturas para la construcción de embarcaciones
Exit
Przewiń na górę