NO SILICONE
TEXTURE :
PACKAGING:
APPLICATION METHODS:
Sea-Line® S1 PREMIUM guarantees obtaining a very high gloss on the surface in one-step polishing process.
S1 Premium Compound is designed for surfaces difficult to polish, such as varnishes (also polyurethane ones) plexi or polycarbonates and laminates. At the same time the used polishing grain gives a very high gloss and efficiently removes defects and grinding scratches after using sandpaper of gradation from P800. (in case of dark colours after using sandpaper of gradation <P1200).
The compound is provided in the form of liquid, it allows for a precise dosing of appropriate amount, depending on the type of the surface that is being polished.
Surface | gelcoat, polyurethane paints and varnishes, plexi, polycarbonate | |||
Function | removing defects from the surface gloss restoring | |||
Consistency | liquid – creame paste | |||
surface preparation * | mechanical grinding | manual grinding | ||
light color | dark color | light color | dark color | |
gelcoat | P800 ⇒ | P1200 ⇒ | P1200 ⇒ | P1500 ⇒ |
polyurethane paint | P800 ⇒ | P1200 ⇒ | P1200 ⇒ | P1500 ⇒ |
plexi, polycarbonate | P1500 ⇒ | P1500 ⇒ | P2000 ⇒ | P2000 ⇒ |
high hardness surfaces | P1200 ⇒ | P1500 ⇒ | P1500 ⇒ | P2000 ⇒ |
* grinding paper minimal gradation
Surface preparation :
Clean the surface destined for polishing. If removing defects is necessary, polish the surface with sandpaper of the following gradation preliminary polishing: <P500
Polish the surface with sandpaper of final gradation : P800 →.
Dark colours or hard surfaces polish the surface with sandpaper of final gradation : P1200 →.
More applicators Sea-Line® / BRAYT
(code: 300006613)
Polishing sponge whit velcro :
Polishing wool BALL (80mm) Sea-Line :
(Kod : 300006619)
Clean the surface, apply the compound onto an element or head (wool or tough sponge)
Apply the compound at minimum rotations on the whole surface that is being polished (800-1000 rotations/min) polishing until it changes colour and the compound changes its texture
Slowly increase the speed max. to 1800 RPM working with a little pressure
Further steps :
Clean the surface. In order to protect the surface, it is recommended to use:
Sea-Line Brayt S5 it is quick and easy in use product on base wax, recommended for every smooth and gloss […]
S4 PROTECT WAX Perfect gloss with lasting effect and protective cover. Reduces the adhesion of dirt. Suitable for gelcoat and […]
S2 EXTRA SHINE HOLOGRAM REMOVER FINISHING COMPOUND CUT LEVEL = 2 GLOSS LEVEL = 10 NO SILICONE Sea-Line® S2 finishing […]
The type of polishing applicator determines the efficiency of removal of defects. Depending on your needs we offer wool lamb […]
We do not sell retail. Our products can be found in many stores in Poland and abroad. Our distributors run stationary and online stores. The full list of distributors and contacts can be found on our website at the following link click here.
Yes, you can paint the bottom of the boat with polyurethane paint due to its high mechanical strength. We recommend this solution when the boat is not launched for a long time and is not exposed to fouling.
We do not recommend degreasing the surface with acetone, because acetone evaporates very quickly, which affects the quality of cleaning the painted surface.
Refilling and to tackle inequalities caused by damage to or during the course of production
Protects boat surfaces from the effects of destructive activities osmosis and corrosion
Provide an aesthetic and a perfect look of the boat also protective against water and UV radiation
Protect the hull from fouling with algae and shells
Effectively remove scratches, refresh the color of gelcoat or paint, fast shine effect
Special preparations for effective cleaning and refinishing
Laminating, gluing and filling in cracks in gelcoat
Range of products useful in the boat builder work